لاصق الإيبوكسي (Weberanc 535 Ve) من (Sodamco) سعة (300Ml)

It is suitable for brick, concrete, mortar, and other surfaces, including both porous and non-porous substrates.

The resin cures quickly, with an initial set in about 3 minutes and full strength achieved after 24 hours.

When cured, Weberanc 535 VE can resist up to 500 kg per square centimeter, making it strong for anchoring applications.

Each 300 ml tube yields up to 40 ml of usable product.

It performs from -5°C to 95°C and resists most chemicals, acids, and solvents after curing.

Prep the surface (clean, dry, and free of dust). Mix the two components per the label until uniform. Apply the resin to the anchor area or into the hole, insert the anchor, and ensure the bond fills the voids. Allow curing: initial set around 3 minutes, full strength after 24 hours. Use the resin in vertical or horizontal applications because it is non-sagging and non-drip.

Yes, it can be used indoors with proper ventilation. Wear protective gloves and eye protection, avoid skin or eye contact, work in well-ventilated areas, and follow all safety guidance on the label.

It’s ideal for securing dowels, reinforcing roof tiles, filling cracks and grooves, and anchoring screws, bolts, and other anchors. It’s suitable for indoor and outdoor projects and can be used alone or with other systems.

For a direct comparison, you can review the Weberanc 535 HV option on Fepy to understand differences in formulation, cure times, and strength. See: https://fepy.com/products/weberanc-535-hv-anchoring-resin-300ml

Compare with other epoxy anchoring resins on Fepy to evaluate differences in curing time, strength, and suitability for vertical surfaces. See: https://fepy.com/products/epoxy-anchoring-resin-300ml

Explore the broader category of anchoring resins at Fepy: https://fepy.com/collections/anchoring-resins