بخاخ زجاج مصنفر من راست أوليوم وزن (11oz) بلمسة نهائية خاصة غير لامعة لون أبيض

Glass surfaces such as windows, doors, mirrors, skylights, and shower doors. Indoor use only.

You’ll get a semi-transparent frosted matte finish that enhances privacy without completely blocking light.

The finish is long-lasting and designed to resist chipping and fading.

Approximately up to 7 square feet, depending on surface porosity and application method.

It dries to the touch in about 5–10 minutes, allowing for faster project progress.

Yes, it’s intended for indoor use and formulated with a relatively low odor. Ensure proper ventilation during application.

Yes, the spray is suitable for stenciling to create custom designs or patterns on glass surfaces.

Shake the can well, apply in light, even coats from a reasonable distance, and allow each coat to dry before applying the next. Multiple light coats generally yield a smoother result than a single heavy coat.

Wait for the finish to fully cure, then clean with standard glass cleaner or mild soap and water. Avoid abrasive cleaners that could scratch the frosted surface.

If you’re not happy with the result, re-spray with light coats after the previous coat has dried to the touch; touch-ups are easier with multiple light coats.

Consider similar frosted-glass finishes available on Fepy, such as: 1) Rust-Oleum Specialty Frosted Glass Spray - 11 oz (https://fepy.com/product/rust-oleum-specialty-frosted-glass-spray-11oz) 2) Krylon Frosted Glass Spray - 11 oz (https://fepy.com/product/krylon-frosted-glass-spray-11oz). These offer comparable results for indoor glass surfaces; choose based on finish tone, coverage, and drying times.