المفك الفاحص الكهربائي ستانلي (120)

It can measure voltage (AC and DC) up to 120 V, electrical resistance, current, and temperature using its built-in thermocouple. An audible buzzer helps signal out-of-range readings.

The device includes overload protection and short-circuit protection to help prevent damage to the tool and the circuit under test. It also provides visual and audible cues when readings exceed safe levels.

Ideal for professional electricians and technicians performing on-site troubleshooting, wiring verification, circuit checks, and quick diagnostics in both AC and DC electrical systems up to 120 V.

Power on the instrument, select the measurement mode (voltage, resistance, current, or temperature), connect the test leads to the circuit under test, observe the reading on the LCD, and listen for the buzzer signal if readings are out of range. Always follow proper safety procedures and ensure the system is de-energized when required.

Yes. The Stanley 120 Tester is designed to measure both AC and DC signals, with a voltage range up to 120 V.

On Fepy, the Stanley 120 typically offers a higher voltage-capable range and an integrated thermocouple with an audible alert, while other Stanley models (for example, the Stanley 110 Tester at https://fepy.com/product/stanley-110-tester and the Stanley 60 Tester at https://fepy.com/product/stanley-60-tester) may have different voltage limits or feature sets. Check each product page for exact specs.

Yes, given its combination of voltages up to 120 V, AC/DC capability, built-in temperature sensing, large LCD, and safety protections, it offers a practical balance of features and usability for everyday electrical testing on the job.

Keep the device clean and dry, store it in its case when not in use, inspect test leads for wear, replace any damaged leads, and follow manufacturer guidelines for battery or internal components if applicable. Regularly check that the display and buzzer function are working correctly before use.

First, confirm you are in the correct measurement mode and that the test leads are properly connected. Check for damaged leads or connectors, ensure you are within the device's specified voltage range, and re-test. If readings remain unstable, narrow the test area or seek a replacement device to verify accuracy.

Use clean, insulated test leads; connect firmly to test points or terminals; keep the tester steady during measurement; avoid high humidity or moisture; and verify readings against a known reference or a calibrated source when possible.

Look for compatible insulated test leads, a protective case, and any manufacturer-recommended accessories. Consider the on-site environments you work in (dust, moisture, drop risk) and choose a bundle or case that helps protect the tester and keeps leads organized.