Question 1

What is the Stanley STHT1-43118 300mm 3 Vials Classic Box Level used for?

Accepted Answer

It's a compact 300 mm (12 in) box level designed to help you check horizontal, vertical, and 45-degree angles on job sites. With three vials, you can quickly verify levelness and plumb in precise framing, cabinetry, tiling, and general carpentry tasks.

Question 2

How accurate is this level, and what do the specifications mean (0.5 mm/m and 0.5°)?

Accepted Answer

The product highlights a 0.5 mm per meter accuracy (a common spec for box levels). This means you should expect very small deviations over longer runs when checking level or plumb. The listing also mentions '0.5°' in a couple of places, which is likely a misprint; the practical spec to rely on is the 0.5 mm/m figure. In use, rely on the bubble alignment in the vertical, horizontal, and 45° vials for reliable results.

Question 3

What materials is this level built from and how does that affect durability?

Accepted Answer

The level uses impact-resistant ABS plastic with a heavy-duty aluminum frame and shock-absorbing end caps. Rubber feet help grip surfaces. This combination is designed to withstand job-site drops, protect the tool from impact, and provide long-lasting durability in rough construction environments.

Question 4

How many vials are there and which orientations do they cover?

Accepted Answer

There are three vials: horizontal, vertical (plumb), and a 45-degree vial. This setup lets you quickly check level across a surface, plumb a wall, and verify angles at 45 degrees.

Question 5

What is the weight, and why does a lighter level matter on the job?

Accepted Answer

The level weighs about 0.55 pounds (light enough for one-handed use). A lighter design reduces user fatigue on extended projects while still providing sturdy, stable readings thanks to the reinforced frame and grippy feet.

Question 6

How do the rubber end caps and feet improve performance on uneven surfaces?

Accepted Answer

The two shock-absorbing end caps protect the ends from impacts, while the rubber feet grip most surfaces to prevent slipping—especially useful on inclined surfaces or uneven worktops. This helps you get stable readings even when the surface isn’t perfectly flat.

Question 7

What are the basic steps to use this level effectively?

Accepted Answer

Steps: 1) Clean the measurement surface. 2) Place the level on the surface you’re checking. 3) For horizontal checks, look at the horizontal vial and align the bubble to the center. 4) For vertical checks, hold the level against the edge and ensure the vertical vial is centered. 5) For 45-degree checks, align using the 45-degree vial. Repeat as needed to verify consistent readings across multiple points.

Question 8

What are common use cases for this Stanley level?

Accepted Answer

Ideal for framing, cabinetry installation, door and window alignment, tile layout, countertop installation, shelf mounting, picture hanging where precise leveling or plumb is required, and any task requiring a quick, reliable level check on a 12-inch tool.

Question 9

How does this model compare to similar options available on Fepy?

Accepted Answer

If you’re weighing options on Fepy, consider these close equivalents and see their specs and readings to find the best fit:
- Stanley STHT1-43118 300mm 3-Vial Classic Box Level (current product): https://fepy.com/products/stanley-stht1-43118-300mm-3-vials-classic-box-level
- Stanley STHT1-43116 150mm 2-Vial Box Level: https://fepy.com/products/stanley-stht1-43116-150mm-2-vial-box-level
- Stanley STHT1-43060 250mm 2-Vial Box Level: https://fepy.com/products/stanley-stht1-43060-250mm-2-vial-box-level
These alternatives offer similar build quality with variations in length and vial count, so you can pick based on reach and use-case needs.

Question 10

How should I clean and maintain the level to keep it accurate?

Accepted Answer

Wipe the level with a clean, damp cloth to remove dust and debris. Avoid using harsh solvents that could degrade the ABS plastic or the vials. Keep it dry and store it in a protective case or pouch to prevent impact damage and maintain accuracy over time.

Question 11

Is this Stanley box level compatible with common accessories or mounting aids on Fepy?

Accepted Answer

Yes, you can pair it with standard accessory options such as magnetic holders or small mounting aids commonly available for levels. Check product pages on Fepy for compatible add-ons and ensure you match the mounting type to your use case.

Question 12

What should I look for when deciding if this is a good value for my projects?

Accepted Answer

Evaluate durability (ABS plastic with aluminum frame and rubber end caps), weight (light enough for easy handling), the three-vial setup (horizontal, vertical, 45°) for versatile checks, and the 0.5 mm/m accuracy rating for precision over longer runs. If your tasks involve frequent leveling and plumb checks, this model offers a balanced combination of portability and reliability.

Item Name	Stanley Classic Box Level 30cm
Model	STHT1-43118
Color	Yellow
Length	30cm
Accuracy	+/-0.5mm/M
Unit	1 Piece

زئبقية تحديد و ضبط المستويات ستانلي قياس (30cm) بالون الأصفر موديل (STHT1-43118)

Features & Benefits

Specification

Attachments

Frequently Asked Questions