مثقب صغير يعمل ببطارية ليثيوم أيون من ستانلي استطاعة (12V-1.5A) موديل (SCD121S2K-B5)

The 20‑position clutch provides precise torque control, so you can start screws without cam-out and avoid over‑driving or damaging softer materials. It helps you match the drive to the material and bit size for cleaner, more consistent results.

The package includes the Stanley 12V Compact Drill Driver, a 12V Li‑Ion battery (1.5Ah), a charger, two screwdriving bits, an LED‑equipped body for visibility, onboard bit storage, and a carrying case for transport and storage.

The drill driver delivers torque up to 130 Nm and features a two‑speed gearbox. It’s well suited for drilling and driving tasks in wood, metal, and plastics for typical home and small‑scale jobs. For heavier materials or extended high‑torque work, consider a more powerful model.

With the 1.5Ah Li‑Ion battery, you get extended runtime suitable for most household tasks. Actual runtime depends on the material, bit size, load, and speed setting. The drill supports fast charging to minimize downtime between tasks.

To change bits, hold the chuck sleeve and rotate it counterclockwise to open the jaws. Insert the bit shaft fully, then release the sleeve to secure the bit. Ensure the bit is properly seated before use.

Use the two‑speed gearbox to switch between drilling and driving. Low speed (higher torque) is best for driving screws and heavier tasks, while high speed (lower torque) is ideal for drilling. Select the appropriate speed based on the material and bit size, then use the variable‑speed trigger for fine control.

The LED work light illuminates your work area for better visibility and accuracy in dim spaces. Onboard bit storage helps keep your essential bits close at hand, reducing clutter and saving setup time.

Always wear eye protection and snug‑fitting clothing away from moving parts. Keep hair tied back and secure loose accessories. Use clamps for smaller workpieces, secure the workspace, and avoid using damaged bits. Let the drill come to a complete stop before changing bits and never operate near flammable materials or in wet conditions.

Keep the chuck and bits clean and free of debris, store the tool in a dry place, and avoid exposing the battery to extreme temperatures. Charge the battery when needed and use a compatible charger. Periodically inspect the chuck and bits for wear and replace as necessary.

If you’re comparing options on Fepy, consider these Stanley alternatives: 1) Stanley 12V Max Drill Driver SCD631S2K-B5 — https://fepy.com/product/stanley-12v-max-drill-driver-scd631s2k-b5 2) Stanley 12V Compact Drill Driver SCD122S2K-B5 — https://fepy.com/product/stanley-12v-compact-drill-driver-scd122s2k-b5 These offer similar form factors and features for 12V‑class drilling and driving tasks.

Charge the battery fully, insert the charged battery into the drill, select the desired speed setting, set the desired clutch torque, insert a bit into the keyless chuck, and test the trigger on a scrap piece to ensure setup is correct. Always wear safety gear and work in a stable, well‑lit area.