جهاز معايرة و ضبط المستويات الليزري ذو الخطوط الخضراء المتقاطعة من ستانلي موديل (STHT77592-1)

The pendulum lock secures the internal leveling pendulum during transport or when mounted in non-level situations. This prevents the laser lines from drifting and protects the internal mechanism, so you get consistent, repeatable readings when you set up again.

The unit emits a 90-degree green laser cross with lines that are designed for interior alignment tasks and fixed exterior work. The accuracy is stated as ±1/8 inch over the tested interior/exterior fixed tasks, with coverage up to about 140 inches on a single plane and a practical range up to 100 ft depending on lighting and surface.

Green beams are typically brighter and more visible in bright or outdoor conditions than red beams. This Stanley model uses a green diode that is reported to be roughly four times brighter to improve visibility in challenging lighting and when projecting across large surfaces.

The set includes the cross-line laser level itself and a magnetic bracket for quick mounting to metal surfaces. The unit also features a self-leveling mechanism and a fine-tune adjustment for precise positioning. For elevated or tripod use, you can attach a compatible tripod or bracket when needed.

Place the bracket on a stable surface or metal edge, switch on the unit, and allow the self-leveling system to bring the cross lines to level. Use the fine-tune knob to adjust the line position to your reference, then lock the pendulum when transporting. For outdoor or long-range tasks, ensure you have a method to secure the device against wind or vibrations.

Avoid looking directly into the laser beam, especially at close range. Do not point the beam at people or vehicles. Use appropriate eye protection if needed and keep the device out of reach of children. Do not modify the beam or disassemble the unit, as it could affect accuracy and safety.

Yes, it is designed for interior and exterior fixed alignment tasks. The green beam enhances visibility outdoors, but outdoor performance still depends on surface reflectivity, ambient light, and line projector alignment. A detector or target can help in bright conditions to maintain accuracy over distance.

Use it to establish level lines for ceilings, cabinets, shelves, tile layouts, countertops, electrical outlets, and drop ceilings. The 90° cross lines help you transfer precise perpendicular references quickly across walls and surfaces.

After the unit self-levels, use the fine-tuning adjustment to nudge the beam until it aligns with your reference marks. If the device is out of level, let the pendulum settle and re-check the lines. Regular checks against a known reference will help maintain accuracy.

Consider a compatible tripod for elevated or distant setups, additional magnetic mounts for different metal surfaces, wall targets for easier alignment in bright conditions, and a laser detector if you need to work at longer ranges or in bright sun.

For a quick-alt comparison within the same category on Fepy, you can review similar green cross-line lasers and their specs:

Similar options you can compare on Fepy.com include these alternatives: