جهاز معايرة و ضبط المستويات الليزري ذو الخطوط الخضراء المتقاطعة من ستانلي موديل فاتماكس (FMHT77586-1)

The dual cross lines provide accurate horizontal and vertical references, helping you lay out tiles, mark straight partition lines, and align ceiling tracks or fixtures quickly. The intersecting lines give a reliable reference point for plumb and level across surfaces, reducing guesswork during installation.

The laser offers up to 30 meters of visible range in standard use. If you need extended reach, you can use a detector in pulse mode, which increases the effective working range up to 50 meters, making it suitable for larger rooms or outdoor-like setups when a detector is used.

Green laser beam for brighter visibility; cross line projection (one horizontal, one vertical); self-leveling within ±4°; pulse mode for detector use; IP54 rating for dust and water spray protection; locking pendulum for safe transport; compatible with 1/4” and 5/8” tripods; battery powered by 4 x AA; compact, lightweight design; intended use includes tiling, partitioning, ceiling installations, and general alignment tasks.

The unit automatically levels within a tolerance of ±4°. If the tool cannot level within that range due to uneven mounting or movement, the cross lines may flash or lock to indicate to you that the reading is not level, prompting you to adjust the position or re-mount.

Yes, it can be used outdoors in controlled or semi-outdoor settings. The green beam provides better visibility in bright conditions, and when paired with a detector in pulse mode, you can extend practical use further and improve reading accuracy in ambient light.

The device is compatible with standard tripod threads, supporting both 1/4” and 5/8” thread tripods, giving you flexibility to mount on common hobbyist or professional tripods for stable setup.

Install four AA batteries, secure the pendulum lock for transport, mount the unit on a tripod or flat surface with the appropriate thread, switch it on, and allow it to self-level. For alignment tasks, position the lines where you need reference points and use the pulse mode with a detector if you require extended range.

Handle with care to avoid direct eye exposure to the laser beam. The green beam is bright and potentially harmful if viewed directly. The IP54 rating means it is protected against dust and water spray, making it suitable for indoor and some outdoor work, but always follow standard eye safety practices and wear appropriate protective eyewear when working with lasers.

The package typically includes the FMHT77586-1 unit, four AA batteries, a user manual, and a carry/storage case. Depending on your use case, you might consider a compatible tripod (1/4” or 5/8” threaded) and a detector for extended range in pulse mode.

On Fepy.com, you’ll find similar green-beam cross-line models with comparable self-leveling, IP ratings, and mounting options. For concrete side-by-side comparisons, you can view these nearby options: Stanley FatMax Cross Line Laser Level FMHT77575-1 (https://fepy.com/stanley-fatmax-cross-line-laser-level-fmht77575-1) and a Bosch green cross-line alternative (https://fepy.com/bosch-gll-3-80-cg-cross-line-laser). These provide a sense of range, brightness, and mounting compatibility relative to the FMHT77586-1.