جهاز قياس المسافات الليزري ستانلي يقيس حتى (30M) موديل (STHT1-77138)

It measures distances up to 30 meters with a high-precision laser. The device provides instant distance readings on a backlit LCD display, and it uses a four-line readout to show distances clearly for quick verification.

Power it on and start measuring with the single button. Press once to capture a distance to a target, press again to reset or switch between measurement modes (distance, area, volume). The simple single-button design makes measurements fast and straightforward on the job.

Key specs include: 30 m measurement range, backlit LCD display, four-line readout, IP54 rating (dust and splash resistant), on-board memory for last 10 measurements, auto power-down to conserve battery, optional protective pouch and strap, and powered by a CR2 lithium battery.

IP54 means the device is protected against limited dust ingress and water spray from any direction. This makes it suitable for typical indoor construction sites and dusty environments, though it isn’t designed for heavy rain or immersion.

The TLM99 stores the last 10 measurements in its on-board memory, so you can quickly recall recent results without re-measuring. This is helpful when you’re taking multiple measurements for a project and need to compare values.

The package includes the Stanley TLM99 laser distance measurer, a replaceable CR2 lithium battery, a protective pouch, and a strap for convenient carrying.

The device runs on a CR2 lithium battery. Replace the battery when readings become erratic or the display dims. It also features automatic power-down after a period of inactivity to conserve battery life.

Ideal for interior design, cabinetry and furniture layout, room sizing and planning, real estate measurements, construction quick checks, and any task where fast, repeatable distance readings are beneficial.

Only use the laser as intended; avoid pointing the laser at people’s eyes. Do not measure reflective or dangerous surfaces where a reflec­tion could cause misreadings. Treat it as a tool for measured, controlled environments rather than hazardous applications.

Aim at the target, press the measure button to capture the distance, and check the result on the backlit display. For accuracy, keep the device steady, measure from the correct reference edge, and use the memory function to compare multiple readings if needed.

If you’re exploring alternatives on Fepy.com, you can browse similar models by using the site’s search for laser distance meters to compare range, memory, IP ratings, and display features. Quick reference link: https://fepy.com/search?q=laser+distance+meter