صمام بوابة نحاسي (Sundex) قياس (1")

It features a solid brass body with a stainless-steel stem, double O-ring seals for a tight leak-free seal, a lever handle for easy operation, and a safety lock to prevent accidental opening. The construction is designed for corrosion resistance and longevity in water applications.

This valve is 1 inch in nominal size and is designed for standard 1" piping in typical potable-water installations. It is built to work with standard fittings compatible with 1" brass valves.

It is suitable for both residential and commercial water systems, including main lines, branch lines, and isolation of sections within potable water networks.

Double O-ring seals improve stem sealing across temperature and pressure changes, reducing the chance of leaks around the stem and enhancing overall reliability.

Steps: 1) Shut off the water supply and relieve pressure. 2) Cut and prepare pipe ends, deburr if needed. 3) Apply PTFE tape or pipe sealant to male threads. 4) Thread the valve onto the pipe by hand, then snug with a wrench (avoid overtightening). 5) Ensure the handle operates freely and the valve is properly aligned. 6) Slowly restore water and check for leaks, tightening as necessary.

To open or close, move the lever to the desired position. The safety lock engages to prevent accidental movement; to operate, release or disengage the lock, then adjust the lever and re-engage the lock after setting.

Periodic inspection for leaks and corrosion is recommended. If the stem or seals show wear, it may require lubrication with an appropriate plumbing lubricant and, if needed, replacement of O-rings or seals by a qualified technician.

Compared to smaller 1/2" brass gate valves, the Sundex 1" model provides higher flow capacity and is designed for higher-volume segments of a water line, while maintaining the same gate-valve operation and corrosion-resistance. See Sundex 1/2" Brass Gate Valve for a size-variant option: https://fepy.com/product/sundex-12-brass-gate-valve

Yes, Fepy offers other sizes in the Sundex brass gate valve family, such as 1/4"–1 1/4" variants. For example, the 1/4"–1/4" model can be found here: https://fepy.com/product/sundex-114-brass-gate-valve

The valve uses brass suitable for potable-water piping, a stainless-steel stem, and proper seals to minimize leaks. It’s designed for standard potable-water service; ensure it meets local plumbing codes and installation practices for your region.

It combines durable brass construction, corrosion resistance, an ergonomic lever with a safety lock, and a straightforward installation, delivering reliable shutoff and long service life, which contributes to better overall value over time.