حنفيّة صمّام الزاوية (Sundex) قياس (½")

The Sundex Angle Valve 1/2" (1025) is a brass-bodied shutoff valve with 1/2" inlet and outlet connections. It provides smooth, precise control of water flow for residential or commercial plumbing, including water supply, irrigation, and appliance connections. It features a brass stem, PTFE packing for leak resistance, and an adjustable knob with a safety stop cap to help keep the valve shut when off.

Key specs include a 1/2" inlet and outlet, brass body and stem, PTFE packing for a tight seal, and an adjustable knob with a safety stop cap. The valve is designed for hot and cold water applications and carries CSA certification for safety and quality assurance.

The knob lets you dial in the desired flow or shut-off position with precise control. The safety stop cap is designed to keep the valve securely closed when in the off position, helping prevent accidental opening and ensuring a reliable seal when the valve is turned off.

This valve is suitable for water supply lines in homes and offices, irrigation systems, appliance hookups, heating and air conditioning lines, and water filtration installations. Its 1/2" connection makes it a common fit for many standard plumbing configurations.

General steps: (1) Shut off the main water supply. (2) If needed, clean the male threads and apply a suitable thread sealant or PTFE tape to the connections. (3) Attach the valve to the pipe fittings by hand initially, then tighten with an adjustable wrench without over-tightening. (4) Check for leaks by slowly restoring water supply and inspecting the joints. (5) If leaks appear, re-tighten or reseal as necessary.

This valve is designed for low maintenance, but periodic checks are recommended. Inspect for leaks at the connections and around the knob area. If you notice any leakage, reseal the threads or replace the packing if needed. Keep the operating knob clean and ensure the safety stop cap remains intact.

The valve uses a brass body and PTFE packing for reliable sealing and corrosion resistance. It is CSA certified, which provides confidence in its safety and quality standards for plumbing installations.

Other 1/2" Sundex angle valves on Fepy (such as models 1026 and 1027) offer similar connection sizes with variations in design details, packing, finishes, and certifications. For a side-by-side look, you can explore these alternatives here: https://fepy.com/product/sundex-angle-valve-1-2-1026 and https://fepy.com/product/sundex-angle-valve-1-2-1027.

You’ll typically need a few common plumbing tools: an adjustable wrench or crescent wrench, Teflon/PTFE tape or appropriate thread sealant, a clean cloth for wiping excess sealant, and possibly a small flashlight to inspect connections after installation.

Yes, the valve is designed for hot and cold water applications. When installing, ensure all components (including seals and packing) are rated for your system’s maximum temperature to maintain a reliable seal and long service life.

Brass offers robust corrosion resistance, durable mechanical strength, and good longevity in both hot and cold water environments. Brass valves typically provide reliable performance in a wide range of plumbing applications, including those with varying water pressures.

Confirm that your piping uses standard 1/2" fittings and that the valve’s threads match (typically 1/2" NPT or BSP depending on region). On Fepy, you can compare product specifications for inlet/outlet sizing and thread type to ensure a proper fit with your existing plumbing.

You can explore related Sundex 1/2" angle valve options on Fepy at these product pages: https://fepy.com/product/sundex-angle-valve-1-2-1026 and https://fepy.com/product/sundex-angle-valve-1-2-1027. These pages show different model options that may suit your needs and budget.