صمام عدم الرجوع (Sundex) قياس (1")

It acts as a one-way valve to prevent backflow in-line, protecting equipment and ensuring fluid flows in the intended direction. It is designed to block reverse flow up to 15 psi while allowing smooth forward flow.

Key specs: 1 inch inline check valve, corrosion-resistant polypropylene body, reinforced silicone gasket, metal-to-metal ball seal, works up to 150 psi, bursts at 200 psi, backflow prevention up to 15 psi, and maximum operating temperature of 140°F.

The valve uses polypropylene for the body, a reinforced silicone gasket, and a metal-to-metal ball seal. These materials provide corrosion resistance, durability, and reliable sealing, making it suitable for residential, commercial, and some industrial applications with compatibility to typical water and light chemical streams.

Ideal for residential, commercial, and light industrial piping where backflow protection is needed in water and non-aggressive liquid lines. It’s well-suited for inline installation in water supply lines, irrigation, and similar systems where backflow prevention is desired without high-temperature or aggressive chemical exposure.

Install inline in the direction of flow as indicated by the valve’s flow arrow. Ensure the pipe connection is secure and clean, then secure the valve in place. The design supports quick and simple securing in-line, with no special tools required beyond standard piping fittings for your system.

Yes. Use within its rated limits: up to 150 psi working pressure, up to 140°F operating temperature, and within its backflow protection rating of 15 psi. Use compatible fluids (primarily water or non-aggressive liquids) and install in clean, properly supported sections of piping to avoid undue stress.

Compared to other 1" check valves, the Sundex model emphasizes corrosion resistance with polypropylene and a robust silicone gasket and metal-to-metal seal, making it a solid choice for water lines and light chemical services. When comparing, consider material compatibility, maximum operating pressure, and temperature limits to ensure it fits your system needs.

If you’re evaluating alternatives on Fepy, you can compare similar 1" inline check valves by browsing the 1 inch valve category or search results for ‘1 inch check valve’ on Fepy. For example, you might review other polypropylene or PVC inline check valves available on Fepy to compare price, materials, and pressure ratings.

Choose this valve when you need reliable backflow protection in a compact inline form with corrosion resistance and a simple installation. If you require higher temperature tolerance, chemical compatibility beyond water, or higher backflow pressure ratings, you may look at alternative materials or models offered by Fepy to match those requirements.

Regular inspection for leaks and flow consistency is recommended. Since it uses a silicone gasket and metal-to-metal seal, check for any signs of wear or degradation in the gasket or seals if the system undergoes frequent cycling or exposure to harsh conditions. Clean installation points periodically to prevent debris from affecting sealing.

It’s designed for residential to light commercial use with a 150 psi working pressure and 140°F max temperature. For continuous high-duty industrial service, verify that fluid chemistry, pressure, and temperature stay within specified limits, and consider evaluating alternative models with higher ratings if needed.

Evaluate the required pressure rating, temperature range, chemical compatibility, and durability. If your system operates well within 150 psi and 140°F with non-aggressive liquids, this Sundex valve offers solid performance at a likely lower cost. If you need higher specs or specialized materials, compare with other options on Fepy to ensure you’re balancing price and performance appropriately.