غطاء الرأس للحماية الكيميائية و الطوارئ (Sundstrom) موديل (SR 76-2) باللون الفلورسنت

The SR 299-2 filter is a combined ABEK1-Hg-P3 R filter. This provides protection against a broad range of inorganic and organic gases and vapors (A, B, E, K categories), mercury vapor (Hg), and high‑efficiency particulates (P3). It’s designed to reduce exposure to many chemical hazards you might encounter in emergencies.

In an emergency, follow these fast steps: 1) Remove yourself to a cleaner area if possible. 2) Hold the hood open and place the silicone half mask over your face. 3) Pull the hood over your head and secure it so the seal around the face is snug. 4) Ensure the filter is attached and properly seated. 5) Check for comfortable breathing and proceed to evacuate. The design emphasizes quick, minimal adjustments to get you protected fast.

Key specs include a silicone half mask paired with a chemical‑resistant hood, delivering a compact, lightweight design for rapid donning. It comes with the SR 299-2 filter (ABE K1-Hg-P3 R), providing broad chemical and particulate protection. The system emphasizes a secure seal and ease of use in emergencies.

Ideal for chemical emergency escape scenarios where quick protection is needed, such as lab spills, industrial chemical releases, or confined‑space incidents. It’s designed for situations where oxygen is present and fast evacuation is critical, helping you minimize exposure during a chemical event.

The SR 76-2 is intended for emergency use. Filter life depends on exposure and event conditions. After any actual use, the hood and filter should be replaced. Store and inspect spare filters according to the manufacturer’s guidelines to ensure readiness when needed.

Yes. The design prioritizes rapid donning by one person, with a silicone half mask and hood that can be donned quickly without requiring extensive adjustments. This makes it suitable for solo readiness in emergencies.

Compared with other escape hoods on Fepy, the SR 76-2 emphasizes the integrated silicone mask with a chemical‑resistant hood and a high‑performance combined filter for broad coverage. For alternatives, you can explore other Sundström escape hoods on Fepy to weigh donning speed, fit, and filter options side by side. Example alternatives (available on Fepy) include these pages: https://fepy.com/product/sundstrom-sr-99-escape-hood and https://fepy.com/product/sundstrom-sr-97-escape-hood. These can help you compare donning speed, protection scope, and compatibility with other filters you may already use.

The SR 76-2 is manufactured to meet applicable safety standards for chemical escape hood systems. Always check the product label and official documentation for the precise standards and certifications applicable to your region and use case to ensure compliance with local requirements.

If you need rapid, ready‑to‑use chemical protection for emergency evacuation, the SR 76-2 provides a compact, integrated solution with a high‑coverage filter. Its value comes from fast donning, portability, and the breadth of protection. Consider your risk scenarios, training needs, and replacement costs for filters when evaluating value.

Store the SR 76-2 in a cool, dry place away from direct sunlight and chemicals. Keep it in its protective packaging or case to prevent damage to the hood and filter. Regularly inspect seals and the integrity of the hood and mask, and ensure spare filters are readily accessible for quick replacement if needed.

Before use, inspect the hood for any signs of wear, tears, or cracks in the silicone mask and hood. Check the seal around the face for a snug fit, verify the SR 299-2 filter is properly seated, and ensure there are no obstructions in the breathing pathways. If any damage or deterioration is detected, replace the affected components before use.