لاصق السباكة (Tangit) متعدد الاستخدامات الخاص بتركيبات (UPVC) سعة (453Ml) مع فرشاة موديل (333455)

Key specs: 453 ml container; All-Pressure UPVC adhesive; brush included for easy application; fast-acting and long-lasting bond; suitable for UPVC pipes and fittings; resistant to water and many chemicals; non-flammable; designed for use in both hot and cold conditions.

Application steps: (1) Clean and dry the bonding surfaces. (2) Apply an even coat of adhesive to one surface using the included brush. (3) Join the components and press firmly. (4) Allow for the recommended open time before pressurizing the system. (5) Wipe away excess adhesive. (6) Store and cure according to label directions. Avoid skin contact and inhalation; use gloves and ensure good ventilation.

Yes. The adhesive is formulated for UPVC installations and is described as suitable for use in both wet and dry conditions. For best results, ensure surfaces are clean and dry prior to application and follow cure times specified on the label.

Tangit 333455 is specifically formulated for UPVC materials. It is not recommended for bonding most other plastics unless the manufacturer’s compatibility is explicitly stated. For non-UPVC applications, look for a product specifically rated for those plastics.

Open time and cure time depend on ambient temperature and humidity. Generally, you should allow sufficient time for the bond to develop strength before exposing the joint to pressure. Higher temperatures can speed up curing, while very low temperatures may slow it down. Always follow the label’s open time and curing guidelines for your specific conditions.

Safety basics: wear gloves to avoid skin contact and use in a well-ventilated area. Keep away from open flames as it is non-flammable but always follow the product label. If adhesive gets on skin or eyes, rinse with plenty of water and seek medical advice if irritation persists. Store upright in a cool, dry place away from heat sources.

Compared to similar UPVC adhesives on Fepy, Tangit 333455 offers a large 453 ml volume with an integrated brush and is optimized for all-pressure UPVC jointing in both wet and dry environments. For alternatives, you can consider: Tangit All-Pressure UPVC Adhesive 453ml with Brush (URL: https://fepy.com/product/tangit-all-pressure-upvc-adhesive-453ml-with-brush), Soudal UPVC Adhesive 500ml (URL: https://fepy.com/product/soudal-upvc-adhesive-500ml), and Everbuild UPVC Adhesive 450ml (URL: https://fepy.com/product/everbuild-upvc-adhesive-450ml). Each has its own bonding strengths and open/cure times, so choose based on your project needs and surface conditions.

Typical uses include bonding UPVC pipes and fittings in residential plumbing, irrigation systems, and sanitary installations. It’s suitable for joining straight runs, elbows, tees, and other UPVC components in both indoor and outdoor settings where a strong, water-resistant bond is required.

Ensure all bonding surfaces are clean, free of oil, grease, dust, or any contaminant. Lightly abrade very smooth surfaces if needed, wipe clean, and allow to dry completely before applying adhesive. Apply an even coat to the prepared surface, press components together firmly, and maintain alignment while the adhesive cures.

Tangit UPVC adhesives are available in a range of packaging sizes depending on the supplier. For alternatives on Fepy, you can explore products such as Tangit All-Pressure UPVC Adhesive 453ml with Brush (URL: https://fepy.com/product/tangit-all-pressure-upvc-adhesive-453ml-with-brush), Soudal UPVC Adhesive 500ml (URL: https://fepy.com/product/soudal-upvc-adhesive-500ml), and Everbuild UPVC Adhesive 450ml (URL: https://fepy.com/product/everbuild-upvc-adhesive-450ml). Check each product page for size variants that may suit your project scale.