لاصق خاص بالأنابيب و التركيبات (UPVC) مع فرشاة من (Tangit)

This adhesive is formulated to bond rigid UPVC (UPVC-U), unplasticized PVC, and ABS pipes and fittings, making it versatile for a range of plumbing installations.

A bond forms within about two minutes of application. For full strength, interior joints take about 24 hours, while exterior joints may take up to 5 days to reach maximum strength.

Ensure both surfaces are dry and free from dust, grease, pollen, and other contaminants. Wipe with a clean cloth, then apply the adhesive in a continuous stream to create a seal with no air bubbles before joining the parts.

Apply a thin, continuous bead of adhesive to the outside of the pipe and/or inside of the fitting. Insert the pipe into the fitting, press firmly, and twist slightly to remove air pockets. Assemble within a short working time, then wipe away any excess adhesive.

Store the adhesive capped and upright, away from heat and direct sunlight. Use in a well-ventilated area and wear appropriate PPE (gloves and eye protection) as a precaution. The formula is designed to be low-odor and safe when used as directed.

Yes. Tangit UPVC Adhesive 453ML is suitable for both wet and dry installations, providing reliable, watertight joints once fully cured.

Ideal for plumbing and pipework projects involving UPVC-U, PVC, and ABS pipes, including domestic water supply, irrigation, and general piping installations where a durable, watertight bond is required.

Tangit UPVC Adhesive 453ML offers fast initial bonding and strong long-term performance with a solvent-free style formulation and built-in brush for easy application. For a direct side-by-side look at alternatives on Fepy.com, you can explore Tangit PVC-U Adhesive 450ml at https://fepy.com/product/tangit-pvc-u-adhesive-450ml and Tangit UPVC Adhesive 1L at https://fepy.com/product/tangit-upvc-adhesive-1l to compare sizes and handling features.

Installations requiring quick initial handling while ensuring a long-lasting bond, such as new indoor plumbing lines, exterior conduit connections, or repairs where a watertight seal is essential and fast curing reduces downtime.

Wipe away any excess adhesive with a clean cloth before it cures. Clean tools and hands promptly as curing becomes more difficult once set. Allow the joint to cure undisturbed according to the interior/exterior timing to achieve full strength.

While warranty specifics can vary, Fepy typically offers standard returns and purchase protections. If you need post-purchase reassurance, you can review Fepy’s return options for adhesive products and how to initiate a return if needed.