logo

Hello, Sign In

Trade Account

Terminator

Terminator Crimping and Stripper For FBNCRCA TTWS 560

Out Of Stock
61.79
EXCL.VAT
Incl. 5% VAT AED 64.88

FREE Returns

Sign in & get up to 10% off your first order. Use code WELCOME10.

Upgrade to Fepy Pro and get up to 10% off all orders.

    Key Features

    • Crimper matches the stated product function.
    • Model TTWS 560 supports accurate product matching.
    • Supplied under the Terminator electrical range.
    • Use only with compatible equipment and ratings.
    • Follow the product instructions during use.
    • Selected for crimpers applications.

Features & Benefits

Product Type

Crimper supplied under Terminator model TTWS 560, enabling buyers to identify the exact required product before ordering.

Product Details

Crimping and Stripper For FBNCRCA (Taiwan).

Usage Guidance

Confirm compatibility with the connected equipment and follow the product instructions. Mains electrical work should be completed by a qualified person in accordance with applicable UAE requirements.

Key Specifications

حالة المخزون المخصصة

Out Of Stock

العلامات التجارية

Terminator

عدد الوحدات (الكمية)

قطعة

رقم الموديل

TTWS 560

نوع العنصر

أداة كبس

بلد المنشأ

China

Usage

Using the crimper for compatible domestic trade or project applications

Best Seller

No

Frequently Asked Questions

The Terminator TTWS 560 is a hand crimping and stripping tool, supplied for use with FBNCRCA type work. It lets you strip cable insulation and crimp terminals or connectors with one tool. Confirm compatibility with the connector or cable you are working with, and follow the product instructions before use.

This Terminator tool brings crimping and stripping together in a single handheld unit, so one tool can prepare the cable and secure the connector. For the exact cable sizes, connector types and jaw capacities it handles, check the product label, packaging or manual, as these vary between tool types.

It is suited to preparing cable ends and fitting compatible connectors, such as in low-voltage, data or video cabling where the connector type matches the tool. Installers can use it for site terminations, and home users can use it for small cabling projects. Check which connectors the tool supports before starting.

The stripping section removes the outer insulation to a suitable length without cutting the conductor, and the crimping section then squeezes the connector onto the prepared cable to form a secure joint. Choose the correct slot for your cable and connector, and check the manual for specific sizing guidance.

Switch off and isolate any supply, then strip the cable to the length the connector needs. Place the connector in the matching crimp position, insert the prepared cable fully, and squeeze the handles until the tool completes its stroke. Pull gently on the cable to confirm the joint holds, and practise on spare cable first.

Wipe the jaws and blades clean after use and remove any copper strands or debris. Apply a light film of oil to the pivot and metal surfaces occasionally to resist rust. In humid UAE conditions, especially near the coast, store the tool in a dry toolbox or pouch, ideally with the handles closed.

As a manual hand tool it needs no power, so it suits site and field work around the UAE. Dust and humidity are the main concerns, so keep it in a case, wipe it down after use and avoid leaving it in a hot vehicle or in direct sun for long periods, which can affect handle grips.

Installers and technicians can use it to prepare and terminate cables on site without switching between separate stripping and crimping tools. It is a good fit for repetitive terminations on compatible connectors. Check the connector type and cable size against the tool's specifications, and follow site practice and applicable UAE requirements for electrical work.

Yes, it can be used for small home cabling projects, such as making or repairing cables with compatible connectors. Confirm that the connector type and cable size match the tool before starting. Mains electrical work should be left to a qualified person, so use it only for low-voltage tasks it is designed to support.

Always isolate any supply before working on a cable and never use the tool on live conductors. Keep fingers clear of the jaws and blades, and wear eye protection because strands or small offcuts can fly off. Use the correct slot for the cable size, and have mains work done by a qualified person.

Ratings & Reviews

See what customers are saying

No reviews yet

Be the first to review this product after purchase.

No reviews yet. Reviews appear here once customers review their orders.

More from Terminator

Bestsellers from الكماشات

Manufacturer Warranty

Official warranty coverage from brand manufacturers

99% Claims resolved

Cash on Delivery

Choose Cash or Card as your payment

AED 100+ Min. order value

Secure Payment

100% secure payment processing

256-bit SSL encryption

Free Delivery

On all orders above AED 200 across UAE

Same Day In Abu Dhabi & Dubai

100% Genuine

Authentic products guaranteed

Authorized Distributor

Free Returns

7-day easy return policy

No questions Asked policy