قرص القطع الماسي توتال قياس (4.5") للاستخدام الجاف موديل (TAC2111153)

Tile (including ceramic and porcelain), natural stone, brick, and concrete are all suitable for this dry diamond disc. It’s built for smooth, efficient cutting without water cooling.

Durable construction, fast cutting, and smooth finishes are emphasized. The 4.5-inch size is well-suited for tight spaces and detail work, helping you achieve clean, accurate cuts with less effort.

Power off the grinder, attach the disc to a compatible 4.5-inch grinder with the proper arbor, and secure the guard. Wear eye protection, a dust mask, and gloves. Use steady pressure, don’t force the disc, and let it cut at a steady pace to avoid overheating or binding.

Dry cutting generates dust, so use a dust mask or a vacuum/dust extractor attachment, wear eye protection, and ensure proper guarding. Keep bystanders away and avoid water cooling since this is designed for dry operation.

Inspect for visible cracks, chips, glazing, or uneven wear. If the disc looks damaged, produces excessive vibration, or doesn’t cut smoothly, replace it to prevent unsafe operation.

Comparative options on Fepy include the Total TAC2111152 4.5 Inch Dry Diamond Disc and the Total TAC2111154 4.5 Inch Dry Diamond Disc. See the listed product pages for exact specs and compatibility: https://fepy.com/product/tac2111152-4-5-inch-dry-diamond-disc and https://fepy.com/product/tac2111154-4-5-inch-dry-diamond-disc

Installing or trimming ceramic/porcelain tile, shaping stone countertops or backsplashes, cutting through brick or concrete for openings, and making precise relief or scoring cuts in DIY masonry projects.

Use the disc at the appropriate speed, avoid applying excessive pressure, keep the cutting line steady, allow the disc to cool if it gets hot, and store it in a dry place away from impacts to prevent cracks.

Yes. Its durable construction and efficient cutting performance make it suitable for professional workloads as well as DIY tasks around the home or workshop.

Mark your cut line clearly, use a guide or straightedge, run the grinder at a steady speed, and make multiple light passes rather than one heavy pass. Let the disc’s sharp edge do the work to minimize chipping.