قرص القطع المعدني الكاشط توتال مقاس (14") سماكة (3MM) موديل (TAC2213551)

The Total Abrasive Metal Cutting Disc is a high-performance disc engineered for cutting metal. It’s designed to deliver durable, reliable cuts with good edge precision, making it suitable for metalworking tasks in both professional shops and DIY projects when used with compatible grinders or cut-off tools.

This disc is optimized for metal cutting and works well with common metals such as steel, iron, and aluminum. It should not be used on non-metal materials like wood, stone, glass, or plastics, and avoid using it on materials that could cause glazing or excessive wear.

Key benefits include durable construction for long life, fast and efficient cutting, clean and precise edges, and versatility across a wide range of metal-cutting tasks. It’s designed to provide reliable performance in both professional and DIY settings.

If you’re comparing sizes or variants on Fepy, you can explore similar options like the Abrasive Metal Cutting Disc in different sizes. For example, see these Fepy pages to compare fits and performance: https://fepy.com/product/abrasive-metal-cutting-disc-115mm and https://fepy.com/product/abrasive-metal-cutting-disc-125mm

Common use cases include metal fabrication and repair, automotive and exhaust work, plumbing and stainless-steel installations, workshop metal-cutting tasks, and any project requiring efficient, straight metal cuts.

Install with the tool off, and use the appropriate guard. Mount the disc on a compatible grinder with the correct arbor size, then tighten securely. Use steady, even pressure and let the disc do the cutting—don’t force it. Keep the workpiece clamped, maintain a cool cutting environment, and follow standard PPE guidelines (eye protection, gloves, and hearing protection).

Always wear appropriate PPE (eye protection, gloves, hearing protection, and a dust mask if needed). Inspect the disc for cracks or damage before use, avoid side loads, keep guards in place, and ensure proper ventilation. Do not use the disc at speeds beyond the tool’s rating, and stop if you notice glazing, excessive vibration, or unusual noises.

The disc is designed for metal cutting and is built with premium abrasive grains for durability and performance. It fits standard grinders with common arbor configurations and is engineered for high-speed cutting with reliable edge quality and a long service life. Exact sizes and RPM ratings vary by variant, so check the specific product listing for your intended size.

Store discs in a dry, cool place away from moisture and direct sunlight. Inspect discs for cracks or chips before use, avoid dropping them, and replace if any damage is found. Use the correct speed and avoid exposing the disc to excessive heat or side loading to prevent glazing and edge damage.

This type of disc is designed to be compatible with standard metal-cutting disc sizes and common angle grinders. Check your tool’s arbor size and compatibility with standard 22.23 mm (7/8 inch) or other common arbors, and select the disc size that matches your project needs.

This disc aims to balance durability, cutting speed, and cost-efficiency. It is designed to deliver reliable cuts with longer life than basic discs, reducing downtime and replacement frequency, which can translate to better overall value for metal-cutting tasks.

The disc is suitable for a wide range of metals, including common steels and alloys. For extremely hard alloys or thick sections, consider whether a specialized ceramic or diamond-enhanced disc might be more appropriate, and always start with a test cut to gauge performance and heat build-up.