شفرة المنشار الدائرية (40T) من توتال قياس (7") موديل (TAC231415)

Key specs include a 7-inch (178 mm) diameter, 40 teeth, and Tungsten Carbide Tipped (TCT) construction, providing durability and efficient cutting performance for versatile use.

TCT means the blade teeth are tipped with tungsten carbide, which stays sharper longer and resists wear better than standard steel teeth. This leads to longer blade life and cleaner, more accurate cuts over time.

The product description states it can cut wood, metal, and plastic, leveraging the TCT teeth for efficient and precise cuts across these materials.

First, unplug the saw. Remove the existing blade and inspect the arbor. Align the new blade so the teeth face forward and centered on the arbor, then securely tighten the blade nut and guards before testing the saw at idle.

Always wear eye and hearing protection, use push sticks for small pieces, secure the workpiece, unplug the tool when changing blades, avoid forcing the blade, and monitor for overheating or unusual vibration during cutting.

Keep the blade clean of resin and debris, avoid overheating by making appropriate passes, store it in a dry place, and inspect for damaged teeth before each use. Replace the blade if you notice cracks, missing teeth, or severe wear.

The blade is a 7-inch TCT type; compatibility depends on your saw’s arbor size and maximum RPM. Check your saw’s manual or existing blade to confirm arbor compatibility and ensure your saw can safely handle a 7-inch blade at the expected speeds.

Use cases include general-purpose crosscuts and rip cuts on wood, as well as cutting non-ferrous metal or plastic components in projects where a fast, versatile blade is advantageous.

The listing indicates the blade itself (a single 7-inch blade). Value depends on your needs and how often you replace blades; for multiple materials and longer life, this blade offers durability thanks to TCT technology.

Both are 7-inch, 40T TCT blades, but the TAC231410 is listed with the same tooth count and diameter while the TAC231415 may differ in branding or subtle construction details. For a direct comparison, you can view the TAC231410 page here: https://fepy.com/product/total-tac231410-7-inch-40t-tct-saw-blade

The TAC231420 offers a higher tooth count (48T) for a finer, smoother finish but potentially slower cutting or a different cut quality compared to the 40T TAC231415. For more detail, see the TAC231420 page here: https://fepy.com/product/total-tac231420-7-inch-48t-tct-saw-blade