قرص الجلخ توربو المجزّأ من توتال قياس (4.5") موديل (TAC2411151)

The TAC2411151 is a segmented turbo cup grinding wheel designed for efficient material removal and smoothing. Its segmented profile promotes cooling and debris clearance, helping you achieve faster, more precise grinding on rigid surfaces like concrete, granite, and stone without clogging.

It's best suited for concrete, granite, and stone surfaces. The segmented turbo design helps with fast material removal and a smoother finish on these hard surfaces.

Key specs include a 4.5-inch diameter segment cup and a segmented turbo design. It’s intended for grinding applications on rigid materials and typically uses a standard 5/8-11 arbor compatible with most angle grinders.

Most standard angle grinders that use a 5/8-11 arbor can accommodate this wheel. Always verify your grinder’s RPM rating matches or exceeds the wheel’s operating speed and ensure you use the appropriate guard and accessories.

Steps: (1) unplug the grinder, (2) attach the wheel to a compatible 5/8-11 arbor with the correct flanges, (3) secure the guard, (4) power on and run the grinder at a steady speed with light to moderate pressure, (5) keep the wheel and surface cool by avoiding overheating. Always wear eye protection, hearing protection, a dust mask, and gloves, and inspect the wheel for cracks before use.

Use it for rapid material removal and surface smoothing on concrete floors, countertops, and stone countertops, as well as edge rounding or beveling tasks on stone and granite surfaces.

Keep the wheel clean and dry, store it in a cool, dry place, and inspect for any cracks or damage before reuse. Avoid exposing the wheel to extreme temperatures or impacts that could compromise integrity.

Lifespan depends on material hardness, usage, and pressure. With proper mounting, cooling, and moderate pressure, it provides consistent grinding performance over multiple sessions, but wear will vary with the surface and application.

If you’re exploring alternatives on Fepy, you can compare similar 4.5-inch segmented turbo cup wheels from Total. For example, Total TAC2412151 4.5-In Segmented Turbo Cup Grinding Wheel (https://fepy.com/product/total-tac2412151-4-5-inch-segmented-turbo-cup-grinding-wheel) offers a comparable design with a different branding or segment geometry for nuanced performance. Another option is Total TAC2410152 4.5-In Segmented Turbo Cup Grinding Wheel (https://fepy.com/product/total-tac2410152-4-5-inch-segmented-turbo-cup-grinding-wheel), which may present a slightly different segment layout or bonding. A third alternative is Total TAC2421151 4.5-In Segmented Turbo Cup Grinding Wheel (https://fepy.com/product/total-tac2421151-4-5-inch-segmented-turbo-cup-grinding-wheel) that can vary in wear rate or material composition. Compare these on Fepy to select the one that best suits your material type and grinding speed needs.

Yes. Use light to moderate pressure, maintain a steady wheel speed, and avoid side pressure or overheating. Ensure the wheel is properly secured and the work surface is stable. If you notice glazing or a dull finish, pause to cool the wheel and inspect for damage.

Yes, it can be used for smoothing and light beveling on stone and granite edges, as well as shaping flat surfaces on concrete, provided you use appropriate technique and take care not to overheat or apply excessive pressure.

If you’re not satisfied, you can initiate a return per Fepy’s standard return policy. Be sure to check the product’s eligibility window, condition requirements, and any restocking terms that may apply. Contact Fepy support for instructions if needed.