منشار البنزين توتال ذو السلسلة قياس (445MM) استطاعة (1800KW) موديل (TG5451811)

The TG5451811 is a gasoline-powered chain saw with a 445mm cutting bar designed for heavy-duty cutting tasks. Its 1800KW engine delivers high torque and sustained power for tough jobs like felling, limb removal, and heavy wood cutting. This model is built for durability and can handle demanding outdoor use.

Key specs: Model TG5451811, Engine power 1800KW, Bar length 445mm, Type: gasoline chain saw. The provided details emphasize heavy-duty construction and versatile cutting capability. Other specific specs (weight, displacement, fuel mix ratio) are not listed in the available data.

Before starting: wear appropriate PPE (eye protection, gloves, hearing protection, sturdy footwear). Check chain tension and brake status, ensure the bar oil reservoir is filled, and that the chain is sharp. Start with the choke engaged if the engine is cold, then gradually advance the throttle as the engine warms. Use the chain brake when repositioning or stopping, and keep hands away from the chain while starting and running.

Regular maintenance tips include: keeping the air filter clean, checking and adjusting chain tension, sharpening or replacing the chain as needed, ensuring proper chain lubrication with bar oil, inspecting the spark plug, and cleaning the cooling air intake. Use fresh fuel and replace worn parts promptly to prevent reduced performance.

Key safety features typically include a chain brake and hand guards. Wear PPE such as a hard hat, safety glasses or a face shield, hearing protection, cut-resistant gloves, and sturdy boots. Maintain a firm stance, avoid kickback-prone cutting, and never operate the saw with compromised safety guards.

This model is designed for heavy-duty outdoor cutting. Use cases include forestry work, landscape clearing, large-diameter limb removal, and other demanding cutting jobs where high power and a 445mm bar are advantageous.

To tension the chain: power off, loosen the front cover screws, adjust the tension screw until the chain fits snugly on the bar with a slight sag in the middle, then retighten the cover screws. The drive links should sit properly on the bar rails, and the chain should rotate freely without binding.

Use the recommended gasoline for two-stroke engines and ensure proper bar oil lubrication. Keep the fuel in clean, approved containers and avoid contaminated fuel. Regularly check the bar oil reservoir and refill as needed to prevent chain overheating and wear.

For reference, compare against these available options on Fepy.com: 1) TG5451812-1800KW-450MM Gasoline Chain Saw (URL: https://fepy.com/product/tg5451812-1800kw-450mm-gasoline-chain-saw) — features a slightly longer bar with comparable power. 2) TG5451809-1700KW-420MM Gasoline Chain Saw (URL: https://fepy.com/product/tg5451809-1700kw-420mm-gasoline-chain-saw) — similar power with a shorter bar and lighter profile. These can help you weigh bar length, weight, and power against the TG5451811.

Typically, you should verify that the bar and chain are correctly mounted, set the proper chain tension, fill with bar oil, and ensure the chain brake is functioning. If needed, attach the front cover securely after adjustments and ensure all fasteners are tight before operation.

If the product doesn’t meet your expectations, initiate a return through Fepy’s standard return process. Contact customer support to review eligibility, required packaging, and steps to return. Ensure the item is in its original condition and packaging where applicable.

Operate the saw in accordance with general safety standards for gas-powered equipment. Use the recommended PPE and follow local regulatory requirements for outdoor power tools. Regularly inspect safety features and ensure maintenance is up to date to maintain safe operation.

Use the saw for appropriate outdoor cutting tasks, avoid prolonged continuous operation without breaks, perform regular maintenance, and store it in a dry, clean place. Following the above practices helps maximize performance and longevity of the 1800KW gasoline saw.