المثقب المطرقي الدوار توتال ثلاثي الوظائف قياس (26MM) و المزود بفكوك تثبيت طويلة موديل (TH308268-2)

It offers three modes: rotation only for drilling, hammering only for chiseling, and hammer drilling for drilling into tougher materials. Use rotation for smooth drilling, hammering for breaking through masonry, and hammer drilling when maximum impact is needed.

It's built to handle concrete, brick, and stone. The 26mm capacity means it can create holes up to 26mm in diameter in those materials, depending on bit type and drilling conditions.

The extra chuck lets you swap between different bit types quickly, increasing versatility for varied drilling tasks without hunting for compatible bits.

Safety first: power off the tool, then use the mode selector to choose rotation, hammer, or hammer-drill. To change the chuck, loosen the current chuck, remove the bit, insert the new bit, and tighten securely.

Wear eye protection, hearing protection, and gloves. Secure your workpiece, keep bystanders away, avoid drilling near live electrical lines, and use dust extraction if available. Maintain a steady grip and take breaks to reduce fatigue.

Clean the tool after use, inspect the chuck and bits for wear, lubricate as recommended, and store it in a dry place. Periodically check for loose components and follow any maintenance guidelines in the manual.

It features an ergonomic grip and balanced design for comfortable handling, plus an included extra chuck for quick bit changes and greater versatility on the job.

Installing anchors and drilling into concrete walls for shelves or fixtures, chiseling masonry for clearance or removal, and mounting hardware where robust drilling power is needed.

Compared to Total TH308267-2 26MM Rotary Hammer and Total TH308269-2 26MM Rotary Hammer, the TH308268-2 includes an extra chuck in the package, offering greater bit-swapping versatility. See the alternatives here: https://fepy.com/product/total-th308267-2-26mm-rotary-hammer and https://fepy.com/product/total-th308269-2-26mm-rotary-hammer

Power off and unplug the tool, then carefully try to loosen the chuck or bit with proper bit removal technique. Avoid forcing components; if the problem persists, consult support or refer to the user manual for safe removal steps.

Use standard 26mm shank bits compatible with 26MM rotary hammers. The included extra chuck helps accommodate different bit types, expanding compatibility for various drilling tasks on site.