قلم اختبار الجهد الرقمي توتال (100-500V) موديل (THT292201)

Key features include a voltage range of 100–500 V, a digital voltage readout, ergonomic grip, and a compact, portable design suitable for on-the-go testing in electronics and electrical tasks.

1) Power off the equipment you’ll test and inspect the device for any damage. 2) Hold the tester by the body and avoid touching the probe tip. 3) Bring the probe tip close to the conductor or outlet without touching live metal. 4) Read the voltage value on the display. 5) Turn off after use and store it in a safe place.

Great for verifying outlet voltage, checking for live circuits before performing work on electrical equipment, testing components in electronics projects, and troubleshooting devices where voltage presence needs quick confirmation.

Use appropriate PPE as needed, do not use the tester on damaged insulation or wet environments, keep fingers away from the probe tip, and operate within the specified 100–500 V range. Store the device safely when not in use.

Here are similar options available on Fepy for side-by-side comparison: - Total THT292202 100V-500V Digital Test Pencil — https://fepy.com/product/total-tht292202-100v-500v-digital-test-pencil - Total THT291201 100V-1000V Digital Test Pencil — https://fepy.com/product/total-tht291201-100v-1000v-digital-test-pencil - Total THT293101 50V-600V Digital Test Pencil — https://fepy.com/product/total-tht293101-50v-600v-digital-test-pencil

No special setup is typically required. If there’s a protective cap or cap covering the probe, remove it before use. Power the unit on (if there is a power switch) and ensure the display activates when the tip is near a live conductor. Store safely after testing.

Returns for this product are subject to Fepy’s standard return policy. If you’re considering a return, contact Fepy support to confirm eligibility and next steps.

Listings typically include the Digital Test Pencil itself. Some variants may offer protective sleeves or caps as accessories, either included or available separately.

It provides a dedicated 100–500 V range with a clear digital readout and an ergonomic, portable design, making quick voltage verification straightforward in both fieldwork and lab setups.

This unit is tailored for voltages in the 100–500 V range typical of mains and high-voltage electronics. It is not ideal for typical automotive 12 V testing. For automotive work, choose a tester rated for the specific 12 V range.

Store in a dry, clean area away from moisture and extreme temperatures. Wipe the exterior with a dry cloth after use and inspect the probe tip regularly for any damage. Use as intended and avoid exposing it to water or harsh chemicals.