مقص تقطيع الأنابيب توتال قياس (225MM) موديل (THT53422)

The cutter is rated to cut pipes up to 225 mm in diameter.

It features a robust metal construction and a hardened cutting wheel designed for long life, delivering accurate, clean cuts with minimal burrs in each use.

Steps: 1) Inspect the cutting wheel and ensure it’s sharp. 2) Place the pipe in the cutter’s guides. 3) Tighten the grip so the pipe is held firmly. 4) Rotate the cutter around the pipe, gradually tightening to score and cut. 5) Make a final pass to complete the cut. 6) Deburr the edge if needed and inspect the cut for smoothness.

Keep the tool clean after use, wipe away debris, and apply a light lubricant to the pivot and wheel area if needed. Inspect the cutting wheel for wear and replace it when dull to maintain optimal performance.

Wear eye protection and gloves, secure the pipe properly before cutting, keep fingers away from the cutting wheel, and avoid using the tool in wet or hazardous environments. Use the tool only for its intended purpose and within its stated capacity.

The cutter is designed for standard plumbing pipes and is suitable for common pipe work encountered in professional and DIY settings. Use within its 225 mm capacity for best results.

On-site plumbing repairs, home maintenance, and installations where pipes within 225 mm diameter need to be cut precisely and quickly, especially in tight or awkward spaces where power tools aren’t practical.

If you’re considering similar tools, you can compare with these two alternatives on Fepy: 1) Total THT53421 180MM Pipe Cutter — https://fepy.com/product/total-tht53421-180mm-pipe-cutter 2) Total THT53423 250MM Pipe Cutter — https://fepy.com/product/total-tht53423-250mm-pipe-cutter. The 180MM model is lighter and better for smaller-diameter work, while the 250MM model handles larger pipe sizes; the 225MM THT53422 is a versatile middle option with a balance of capacity and manageability.

For frequent work on smaller pipes, a 180 mm model may be preferable for lightness and maneuverability. If you regularly encounter larger pipes, a 250 mm model can save time. The 225 mm model sits in between, offering a solid all-purpose option for many common jobs.

Store in a clean, dry place away from moisture. Keep the cutting wheel covered or in a protective sheath if provided, and store with the tool in a toolbox or pouch to prevent damage to the wheel and maintain alignment.