كوفرول (TSGC) صغير المسام وزن (63Gsm) باللون الأبيض قياس (Medium)

Key specs include 63 gsm microporous material, taped seams, serged seam with three-thread stitching, elastic wrists/waist/ankles, a zipper front with storm flap, and an attached hood. It comes in white and sizes M through 3XL.

This coverall is suited for chemical handling, spray painting, general industrial cleaning, manufacturing environments, pharmaceutical applications, and other tasks requiring protection from hazardous liquids, splashes, and aerosols.

To don: inspect for tears, unfold the suit, put on the hood first, insert arms through the sleeves, pull to the wrists, fasten cuffs, pull the legs up, secure the ankles, zip up the front, and close the storm flap. To doff: unzip, remove from the legs and arms while turning the suit inward, roll it away from you, and dispose of according to your site’s procedures to minimize contamination.

Taped seams seal joints to prevent contaminants from entering at stitch lines, while elastic openings at the wrists, waist, and ankles create snug fits that reduce gaps and limit exposure in hazardous environments.

Sizes available are M through 3XL. To choose the right size, measure your chest and height and compare to the product’s size chart on Fepy. If you’re between sizes, consider the fit you need for layering and movement in your work tasks.

This microporous coverall is typically designed for disposable use in hazardous environments. After use, discard according to your facility’s safety procedures and local waste regulations to prevent contamination.

Alternative options on Fepy.com include: Proguard Type 4/5/6 Microporous Coverall with Hood 63gsm White: https://fepy.com/product/proguard-microporous-coverall-hood-4-5-6-63gsm-white; Proguard Type 4/5/6 Microporous Coverall without Hood 63gsm White: https://fepy.com/product/proguard-microporous-coverall-63gsm-white-no-hood; 3M Microporous Coverall Type 4/5/6 White 63gsm: https://fepy.com/product/3m-microporous-coverall-type-4-5-6-white-63gsm

Compared to similar options, this Proguard model offers a hooded design with taped seams, three-thread stitching, and a 63gsm microporous fabric, providing strong joint protection and airflow. Alternatives may differ in hood design, seam treatments, or fabric weight, which can affect comfort and level of protection.

It is designed to meet Type 4/5/6 protection requirements for hazardous environments. Use according to your site’s safety protocols, ensure proper don/doff procedures to prevent contamination, and pair with other appropriate PPE as needed for your tasks.

Choose the right size to avoid excessive bunching, wear the hood and adjust it for visibility, ensure proper layering if temperatures require it, and take breaks as needed to prevent overheating since microporous fabrics can affect breathability over long periods.

Consider coverage needs (hooded vs. hoodless), fabric weight (63gsm vs. higher weights), seam treatments (taped vs. standard), and the presence of features like a storm flap. Compare total cost, ease of use, and conformity with your work tasks to determine the best value for your use case.