غراء أوهو (PLUS ENDFEST) إيبوكسي ثنائي المكونات (163g) حتى وزن (300kg) تصلب في (90) دقيقة، روابط لاصقة عالية القوة، مناسب لمواد متعددة لون شفاف

It adheres well to metal, stone, concrete, ceramics, wood, glass, and many hard plastics.

Yes. Its gap‑filling formula bridges small voids and uneven surfaces to deliver full-contact bonds without the need for clamps.

The adhesive has a 90‑minute cure time to reach handling strength, with final properties developing as it fully cures.

Yes. Once cured, the adhesive is machinable and can be drilled, sanded, filed, and painted for clean finishes.

The product is described as providing high‑strength bonding with up to 300 kg bonding capability (actual strength depends on materials, surface prep, and bond area).

Yes. The cured mass is designed to be durable and resistant to chemicals and temperature, making it suitable for both indoor and outdoor applications.

As a two‑component system, mix the two parts in the required ratio until the mixture is uniform in color and consistency, then apply to the prepared surfaces and allow it to cure.

Yes. After curing, the bond is machinable and can be painted or finished to match surrounding surfaces.

Work in a well‑ventilated area, wear appropriate gloves to avoid skin contact, and follow basic handling safety for epoxy adhesives.

Store in a cool, dry place away from direct sunlight and keep containers closed when not in use, following the packaging instructions.

UHU ENDFEST 300 emphasizes high final strength, gap filling, and machinability with a 90‑minute curing window and up to 300 kg strength. Other epoxies on Fepy may offer different cure times, material compatibilities, or strengths, so compare based on your materials, required cure time, and post‑cure finishing needs.