غراء أوهو سوبر أنبوب وزن (3g) سائل فائق السرعة (Direct-Stop) مانع للانسكاب، تطبيق دقيق، مثالي للأعمال اليدوية والمنزلية والمكتبية لون شفاف

It bonds a variety of substrates, including plastics, rubber, metal, ceramics, and wood. For best results, apply to clean, dry surfaces and use small amounts to avoid squeeze-out.

The glue provides instant strength with rapid grab on clean joints. Most small repairs achieve a secure initial bond within seconds, with full cure developing as the adhesive sets.

The Direct-Stop tube is designed to prevent drips and overdosing, enabling precise, controlled dosing. This helps you apply tiny dots or thin lines without waste or mess.

1) Clean and dry the bonding surfaces. 2) Apply a small dot or a fine line along the edge or contact area. 3) Press the parts together and hold briefly to achieve initial bonding. 4) Wipe away excess glue and cap the tube firmly to prevent drying.

Perfect for craft projects, quick home repairs, and office fixes where neat, invisible bonds are desired—such as repairing small plastic parts, jewelry, ceramics, or wooden trims.

Avoid prolonged skin contact and keep away from foods and food packaging. Do not use on porous materials where excess absorption could weaken the bond, and avoid exposure to high heat or solvents that could degrade the adhesive.

If you catch it while still uncured, wipe with a dry cloth or use a damp cloth to remove excess from non-porous surfaces. Once cured, the bond is difficult to remove without damaging the substrate; acetone or a suitable adhesive remover may be needed on resistant surfaces (test first).

Use in a well-ventilated area. Avoid contact with skin and eyes; wear gloves if needed. Do not inhale fumes. Keep away from children and heat sources. Store in a cool, dry place with the cap tightly closed.

Store in a cool, dry place, away from direct sunlight. Reseal the tube firmly after each use and ensure the nozzle is closed to prevent drying.

If you’re not fully satisfied, you can review Fepy’s return options for unopened or lightly used products within the applicable window. Always keep the packaging and receipt to facilitate the process.

The Control Gel variant has a thicker consistency that helps reduce drips on vertical or tricky surfaces, while the standard Control 3 g offers ultra-fine, direct-stop dosing for precise dots and lines. Both provide fast bonding, but your choice depends on the application: gel for vertical or porous surfaces and liquid for precise, flat bonds. See https://fepy.com/product/uhu-super-glue-control-gel-3g for details.

Loctite Super Glue 3 g is a strong alternative with rapid bonding, but UHU’s Direct-Stop No-Spill design often gives more precise control for tiny fixes. If you’re choosing between them, consider whether you need ultra-precise dosing (UHU) or a broadly strong, quick bond (Loctite). See https://fepy.com/product/loctite-super-glue-3g for details.