logo

Hello, Sign In

Trade Account

UNI-T

UNI-T Test Lead CAT III 1000V/ CAT IV 600V 10A UT L25

Out Of Stock
20.43
EXCL.VAT
Incl. 5% VAT AED 21.45

FREE Returns

Sign in & get up to 10% off your first order. Use code WELCOME10.

Upgrade to Fepy Pro and get up to 10% off all orders.

    Key Features

    • UTL25 test lead set for professional testing.
    • Flexible test leads support meter connections.
    • CAT III 1000V/ CAT IV 600V 10A rating supports safer.
    • Supports voltage checks up to 1000V.
    • Supports voltage checks up to 600V.
    • Current range supports checks up to 10A.

Features & Benefits

Application

Designed for multimeter, clamp meter, temperature, and electrical diagnostic work where dependable probe connection is required, with UNI-T UT L25 Multi Meter Test Leads configuration.

Compatibility

Test lead set for electrical meters.

Safety & Build

CAT III 1000V and CAT IV 600V rating.

Key Ratings

10A current rating.

Protection Rating

Insulated lead design for multimeter and clamp-meter use.

Accessory Details

Portable accessory for professional electrical testing.

Key Specifications

حالة المخزون المخصصة

Out Of Stock

عدد الوحدات (الكمية)

قطعة

رقم الموديل

UT L25

العلامات التجارية

UNI-T

نوع العنصر

سلك اختبار

بلد المنشأ

China

Safety Standard Rating

CAT III 1000 فولت / CAT IV 600 فولت

Best Seller

No

Frequently Asked Questions

The UNI-T Test Lead UT L25 is a set of insulated test leads for multimeters, clamp meters and electrical diagnostic work where a dependable probe connection is needed. It is rated CAT III 1000V and CAT IV 600V with a 10A current rating, making it suitable for professional electrical testing.

The confirmed ratings are CAT III 1000V, CAT IV 600V and 10A. The leads have an insulated design for multimeter and clamp meter use. Remember that the lowest rating among the leads, the meter and the circuit sets your safe limit, so always check the markings on the leads and your meter before testing.

It suits voltage, continuity and current checks with compatible multimeters and clamp meters, including work on distribution boards, installations and equipment where the higher category rating matters. Electricians and facilities technicians use it for fault finding and commissioning. Home users with a compatible meter can use it for household testing too.

The measurement category should match the part of the installation you are testing, and your meter must carry a matching rating. This lead is marked CAT III 1000V and CAT IV 600V, which suits higher-category work than basic leads. Confirm the markings on the leads and the meter before starting.

Inspect the insulation and plugs, then push the plugs fully into the correct jacks on the meter as shown in its manual, normally the common jack and the voltage or current jack. Select the function and range first, then touch the probes to the circuit, keeping fingers behind the finger guards.

Wipe the leads clean after use and coil them loosely, avoiding tight bends at the plugs and probes. Keep them away from sharp tools and heat. Inspect the insulation, plugs and tips before each job, and replace the set as soon as you find cracks, exposed conductors or loose connections.

It is suited to the field and the workshop in the UAE, but site heat, dust and moisture can degrade leads, so avoid leaving them in a hot vehicle or in direct sunlight, keep them dry and clean, and replace them if the insulation becomes brittle. Always follow the site's electrical safety rules for live testing.

Electricians and facilities technicians use it for testing distribution boards, circuits and equipment during commissioning, inspection and fault finding. The CAT III and CAT IV ratings make it more suitable for installation-level work than basic leads. Always check the ratings against the meter and the circuit, and follow safe isolation and permit procedures.

Yes, home users with a compatible multimeter or clamp meter can use it for checks such as outlets, fuses, batteries and appliances. Mains electricity can cause serious shock, so only test if you understand the procedure and the leads are in good condition. For anything inside the consumer unit, use a qualified person.

Check the leads before every use and discard them if the insulation is cut or the plugs are loose. Never exceed the marked CAT, voltage or 10A rating, keep fingers behind the guards and do not touch bare tips on live circuits. Use a meter with a matching rating and follow site safe-working procedures.

Ratings & Reviews

See what customers are saying

No reviews yet

Be the first to review this product after purchase.

No reviews yet. Reviews appear here once customers review their orders.

More from UNI-T

Bestsellers from أجهزة الاختبار الكهربائية

Manufacturer Warranty

Official warranty coverage from brand manufacturers

99% Claims resolved

Cash on Delivery

Choose Cash or Card as your payment

AED 100+ Min. order value

Secure Payment

100% secure payment processing

256-bit SSL encryption

Free Delivery

On all orders above AED 200 across UAE

Same Day In Abu Dhabi & Dubai

100% Genuine

Authentic products guaranteed

Authorized Distributor

Free Returns

7-day easy return policy

No questions Asked policy