جهاز القياس الرقمي ذو المشبك (UNI-T UT201) يقيس شدة التيار (400A) و الجهد (200MV-600V)

The UT201 is a digital clamp meter that measures current (up to 400 A) and voltage (with 200 mV and 600 V ranges). It also features a large LCD display, data hold for saving readings, a low battery indicator, overload protection, and a built-in fuse for safety.

Current measurement range: up to 400 A. Voltage measurement ranges: 200 mV and 600 V. These ranges allow you to assess typical low- and high-voltage circuits and electrical loads.

Key features include: data hold to store readings for later review, a large LCD display for easy reading, and a low battery indicator. To use data hold, take a measurement and press the data hold button to lock the value on the screen. The low battery indicator will alert you when the battery needs replacement.

UT201 includes overload protection to prevent damage if measurements exceed the device’s maximum range and a built-in fuse to guard against short circuits, helping protect both the meter and the user.

UT201 is suitable for electricians and technicians performing troubleshooting, installation, and maintenance tasks. Use it for diagnosing electrical circuits in panels, automotive electrical work, and general on-site measurements where clamped current and voltage readings are needed.

To measure current, clamp the jaw around a single conductor carrying the current you want to measure. Ensure the meter is in current mode and that only one conductor is inside the clamp. Read the displayed value on the large LCD.

For voltage measurements, use the appropriate input jacks and leads as you would with a standard digital multimeter. Connect the probes across the component or circuit you’re testing, following proper safety procedures, and read the voltage on the display (using the 200 mV or 600 V range as appropriate).

If you’re considering alternatives on Fepy.com, you can also explore: UNI-T UT202 Clamp Meter (for broader current range and features) at https://www.fepy.com/search?q=UNI-T+UT202+clamp+meter and UNI-T UT213 Clamp Meter (another compact option with additional functions) at https://www.fepy.com/search?q=UNI-T+UT213+clamp+meter. These options provide different feature sets while staying within the UNI-T clamp meter family.

UT201 is a compact, cost-effective option for standard current and voltage measurements up to 400 A and 600 V. If your work requires higher current ranges, additional measurement modes, or more advanced safety features, you might consider other UNI-T clamp meters on Fepy.com (e.g., UT202 or UT213) that offer broader capabilities.

For accuracy: clamp the meter around a single conductor, avoid clamping multiple conductors, use the correct voltage range for the measurement, ensure the device is in good working order (battery above the low-battery threshold), and use the data hold to compare readings when needed. Also, keep the instrument clean and store it properly when not in use.

Regularly inspect the clamp and probes for wear, replace the internal fuse only with the appropriate rated part if needed, monitor the battery health via the low battery indicator, and avoid exposing the meter to moisture or extreme temperatures to preserve accuracy and longevity.

Consider whether you need up to 400 A current measurement, 200 mV and 600 V voltage measurement ranges, data hold, a clear LCD display, and built-in safety features. If these meet your site needs at a favorable price, UT201 offers solid value as a practical, professional-grade option within its class.