UNIFIX 12MM

It is best suited for solid masonry such as concrete and dense brick. For hollow or very thin walls, always check the product’s compatibility notes to ensure adequate load performance.

UNIFIX 12MM comes with a 12 mm nominal diameter and is offered in different embedment lengths. The material is typically corrosion-resistant steel with a protective coating. Load capacity and suitability depend on embedment depth and substrate, so choose the length that matches your mounting depth.

1) Mark the mounting location. 2) Drill a hole of the recommended size. 3) Clean out dust from the hole. 4)_insert the anchor into the hole. 5) Tighten to set the anchor and secure the fixture. 6) Verify the load is supported and the fixture is stable.

Embedment depth should match the recommended length for the chosen variant. Ensure sufficient embedment to achieve the required holding strength, while avoiding over-tightening that could reduce grip.

You’ll typically need a drill with the correct drill bit size for the hole, a hammer or driver, a torque driver or wrench to achieve the correct tightness, and a cleaning brush or compressed air to remove dust from the hole before insertion.

Common applications include mounting shelves, brackets, electrical boxes, handrails, and other fixtures to masonry surfaces where a secure, semi-permanent fixing is required.

Yes. Follow standard PPE guidelines (eye protection, gloves), use the correct drill bit size, avoid over-tightening, and ensure the substrate is appropriate for the selected embedment. Always verify that the installation meets any local building codes or project specifications.

Select the length based on the embedment depth you need to achieve the required holding strength for your fixture. If in doubt, choose a longer embedment and ensure you won’t drill through the back of the mounting surface.

UNIFIX 12MM is designed to provide reliable expansion and grip in masonry substrates, with a 12 mm diameter that suits a common range of fixtures. Its variants offer different embedment depths to align with different mounting requirements, helping optimize strength and ease of installation.

If you’re comparing, you can look at these 12mm alternatives on Fepy.com: UNIFIX 12mm Concrete Anchor - https://fepy.com/product/unifix-12mm-concrete-anchor and UNIFIX 12mm Brick Anchor - https://fepy.com/product/unifix-12mm-brick-anchor. These options offer comparable 12mm fixings with different substrate compatibility.