Question 1

What is the 45 Degree UPVC Elbow used for in plumbing?

Accepted Answer

The 45 Degree UPVC Elbow is a piping fitting designed to change the direction of soil and waste pipes by 45 degrees within building plumbing systems. It’s used to route waste lines around obstacles while maintaining smooth flow and minimizing blockages.

Question 2

What are the key features of this elbow?

Accepted Answer

Key features include a 45-degree angle for directional changes, UPVC material for durability and corrosion resistance, a push-fit style for easier installation, and suitability for both low- and high-temperature applications in interior plumbing and waste systems.

Question 3

What pipe sizes is this elbow compatible with?

Accepted Answer

This elbow is designed to fit UPVC piping of the corresponding size purchased. Please check the product size or diameter on the packaging or product listing to ensure matching with your existing pipes.

Question 4

How do I install this 45 Degree UPVC Elbow?

Accepted Answer

Installation steps: 1) Cut the pipe end square and deburr any rough edges. 2) Check that the elbow’s size matches the pipe. 3) Align the elbow with the pipe and push-fit it until fully seated. 4) Confirm the angle orientation and test for leaks after assembly.

Question 5

What temperatures can this UPVC elbow handle?

Accepted Answer

The elbow is suitable for typical low- and high-temperature indoor plumbing applications found in building waste and soil systems. It’s not intended for extreme heat or non-plumbing uses.

Question 6

How does this elbow help prevent blockages?

Accepted Answer

The elbow features a smooth interior surface that reduces turbulence and friction, promoting steady wastewater flow and minimizing the risk of buildup at bends compared with rougher interior fittings.

Question 7

How is a 45-degree elbow different from a 90-degree elbow?

Accepted Answer

A 45-degree elbow changes direction more gradually, which can ease alignment in tight spaces and reduce abrupt changes in flow. A 90-degree elbow makes a sharper turn and is used when a more abrupt directional change is required.

Question 8

Are there safety or compliance considerations I should know?

Accepted Answer

Use UPVC fittings as intended for interior plumbing and soil/waste disposal. Verify compatibility with local codes and standard plumbing practices. Avoid exposing UPVC fittings to incompatible solvents and extreme heat, and ensure proper sizing for leak-free connections.

Question 9

What maintenance is recommended for this elbow?

Accepted Answer

Periodically inspect for cracks, leaks, or wear. Clean the interior surface if minor blockages occur and replace the elbow if any damage is detected to maintain reliable flow and prevent leaks.

Question 10

Can I compare this elbow with other UPVC options on Fepy?

Accepted Answer

Yes. For alternatives on Fepy, you can explore similar UPVC fittings such as other 45-degree elbows and push-fit elbows. Examples (please verify and use the real product pages on Fepy): https://fepy.com/product/upvc-45-degree-elbow and https://fepy.com/product/upvc-push-fit-45-degree-elbow

Question 11

What makes this UPVC elbow a good value choice?

Accepted Answer

It combines durable UPVC material with a straightforward push-fit installation and a 45-degree geometry suitable for internal plumbing and waste systems, offering a cost-effective solution for long-lasting performance in residential and commercial settings.

Item Name	UPVC Elbow 45 degree
Material	Unplasticized Polyvinyl Chloride
Angle	45 Degree
Connector Type	Elbow
Color	Grey
Size	1 1/2"x 45º,2"x 45º,3"x 45º,4"x 45º,6"x 45º ,50mm x 45º,75mm x 45º,160mm x 45º
Unit	1 Piece

كوع بلاستيكي (UPVC) بزاوية (45) درجة قياس (1.5") يعمل بدرجات الحرارة العالية و المنخفضة لأعمال السباكة و البناء يباع بالقطعة

Features & Benefits

Specification

Attachments

Frequently Asked Questions