Question 1

What is the 90 Degree UPVC Elbow - Per Pcs and what is it used for?

Accepted Answer

The 90 Degree UPVC Elbow is a piping fitting made from UPVC designed to change the direction of soil and waste pipes inside buildings. It connects UPVC pipe sections at a 90-degree angle to create a continuous drainage path. This listing is sold per piece.

Question 2

What are the main features of this UPVC elbow?

Accepted Answer

Key features include high and low temperature resistance, corrosion resistance to chemicals, compatibility with all UPVC pipes for quick installation, and a tight seal to help prevent leaks in drainage systems.

Question 3

What sizes or diameters are available for this elbow?

Accepted Answer

The listing is sold per piece and is designed for standard UPVC pipe sizes. Available options typically include common diameters (for example 50mm, 75mm, 110mm). Please check the product page options for the exact sizes offered.

Question 4

How do I install this UPVC elbow?

Accepted Answer

Installation steps: 1) Cut the UPVC pipe square to the required length. 2) Clean the pipe ends. 3) Apply UPVC primer (if required) and solvent cement to the pipe and elbow. 4) Push the elbow onto the pipe with a twist to ensure a full seating. 5) Hold briefly to allow the joint to set and achieve a secure, leak-free connection.

Question 5

Can this elbow be used for both low and high-temperature soil and waste disposal inside buildings?

Accepted Answer

Yes. The elbow is designed for use in soil and waste disposal within building structures and is suitable for a range of temperatures typical to these applications. Always ensure the material and size are appropriate for your specific system and local codes.

Question 6

Is this UPVC elbow compatible with all UPVC pipes?

Accepted Answer

Yes. The elbow is designed to be compatible with standard UPVC piping, enabling quick and secure connections. Be sure to verify the exact diameter and connection type on the product page to ensure a proper fit.

Question 7

What safety and compliance considerations should I follow when using this elbow?

Accepted Answer

Follow local plumbing and building codes for drainage installations. Wear appropriate PPE when cutting or handling piping. Use proper solvent cement and primers as recommended, and ensure the system is depressurized and clean before making joints to achieve a leak-free connection.

Question 8

What are common use cases for this elbow?

Accepted Answer

Common use cases include changing the direction of waste pipes in bathrooms, kitchens, basements, and other indoor drainage runs where UPVC piping is used for soil and waste disposal.

Question 9

How can I ensure a leak-free connection with this elbow?

Accepted Answer

To ensure a leak-free joint: 1) Use the correct pipe size and fit. 2) Clean and dry pipe ends. 3) Apply approved UPVC primer and solvent cement as recommended by the manufacturer. 4) Fully seat the elbow onto the pipe and allow sufficient cure time before pressurizing the system.

Question 10

Is this sold per piece, and can I buy multiple units for a project?

Accepted Answer

Yes, this item is sold per piece. You can purchase multiple units to meet the needs of your project.

Question 11

Can I return this item if it doesn’t fit my project?

Accepted Answer

Return terms are subject to Fepy’s policy. Please refer to the product page or the returns section on Fepy for the specific terms and timeframes related to returns and refunds.

Question 12

How does this 90-degree UPVC elbow compare to other UPVC elbows available on Fepy?

Accepted Answer

Other UPVC elbows on Fepy come in different sizes and connection types. For example, size variants include 50mm, 75mm, and 110mm elbows (examples with direct product links: https://fepy.com/product/90-degree-upvc-elbow-50mm, https://fepy.com/product/90-degree-upvc-elbow-75mm, https://fepy.com/product/90-degree-upvc-elbow-110mm). You can also find UPVC socket elbows (e.g., https://fepy.com/product/upvc-socket-elbow-90-degree). Choose based on your pipe diameter and connection style to balance fit, flow, and installation ease.

Item Name	UPVC Elbow 90 Degree
Material	Unplasticized Polyvinyl Chloride
Angle	90 Degree
Connector Type	Elbow
Color	Grey
Size	1 1/2"x 90º,1.5"x 90º,2"x 90º,3"x 90º,4"x 90º,6"x 90º ,32mmx 90º,43mmx 90º,50mmx 90º,63mmx 90º ,75mmx 90º,160mmx 90º
Unit	1 Piece

كوع بلاستيكي (UPVC) بزاوية (90) درجة قياس (1.5") يعمل بدرجات الحرارة العالية و المنخفضة لأعمال السباكة و البناء يباع بالقطعة

Features & Benefits

Specification

Attachments

Frequently Asked Questions