Question 1

What is this 4 in UPVC pipe designed for, and what can I use it for?

Accepted Answer

This is a 4-inch diameter UPVC pipe with a 1.5 mm wall thickness and a length of 5.8 m. It’s designed for durable conveyance of fluids and gases, suitable for plumbing, drainage, irrigation, and outdoor applications where UV resistance and smooth interior flow are beneficial.

Question 2

What are the exact specifications of the 4" x 1.5mm x 5.8m UPVC Pipe?

Accepted Answer

Diameter: 4 inches; Wall thickness: 1.5 mm; Length: 5.8 meters; Material: UPVC; UV resistant; Noise-reducing properties; Smooth interior to minimize frictional losses.

Question 3

How does UV resistance benefit outdoor installations?

Accepted Answer

UV resistance helps prevent sun damage and material degradation when the pipe is exposed to sunlight, extending the product life for outdoor or exposed locations.

Question 4

How long is the pipe and can I cut it to shorter lengths?

Accepted Answer

The pipe is 5.8 meters long. It can be cut to shorter lengths as needed with appropriate pipe cutting tools to fit your project.

Question 5

What fittings are compatible with this UPVC pipe on Fepy?

Accepted Answer

This pipe uses standard UPVC fittings designed for 4-inch pipes. When shopping on Fepy, look for 4-inch UPVC fittings such as couplings, elbows, adapters, and tees that specify 4" diameter for a proper fit and leak-free connections.

Question 6

How does this pipe compare to similar UPVC pipes on Fepy.com?

Accepted Answer

Compared to other 4-inch UPVC pipes on Fepy, this model emphasizes a 1.5 mm wall for improved durability and a longer 5.8 m length with UV resistance and noise-reduction characteristics. Alternatives include shorter or longer lengths and different wall thicknesses, which affect flexibility, weight, and price. For direct comparisons, you can review these nearby options on Fepy: 4in UPVC Pipe 6m (https://fepy.com/product/4in-upvc-pipe-6m-1-0mm-wall), 4in UPVC Pipe 3m (https://fepy.com/product/4in-upvc-pipe-3m-1-5mm-wall), and 4in UPVC Pipe Drain 4.5m UV (https://fepy.com/product/4in-upvc-pipe-drain-4-5m-uv-resistant).

Question 7

What are typical use cases or applications for this pipe?

Accepted Answer

Use cases include water supply and drainage lines, irrigation systems, and general piping where a smooth internal surface and UV resistance are advantageous. Its noise-reduction properties may be beneficial in indoor or residential installations near living spaces.

Question 8

What installation steps should I follow to install this pipe?

Accepted Answer

Basic steps: plan your run, cut to the required lengths, deburr the cut ends, dry-fit fittings to ensure proper alignment, apply appropriate UPVC solvent cement or compression fittings per fitting instructions, and allow adequate curing time. Ensure all connections are clean and dry before joining.

Question 9

What safety considerations should I be aware of when using UPVC pipes?

Accepted Answer

Handle pipes with care to avoid impact damage. Use appropriate PPE for cutting (gloves and eye protection). Ensure compatibility of the pipe with the intended fluids or gases and verify pressure ratings for your application. Store away from extreme heat and direct sunlight when not in use and follow local building codes.

Question 10

Is this pipe suitable for conveyance of both fluids and gases?

Accepted Answer

Yes, UPVC pipes are commonly used for the conveyance of both fluids and gases when correctly rated and installed. Always verify the specific pressure rating, fittings compatibility, and material suitability for your particular fluid or gas before use.

Question 11

What makes this pipe a good value compared to alternatives on Fepy?

Accepted Answer

This pipe combines a durable 1.5 mm wall with a 5.8 m length and UV resistance, reducing the frequency of fittings and joints for longer runs. Its noise-reduction property can improve installation comfort in inhabited spaces. When comparing, consider total run length, number of joints, and price per meter to gauge overall value against other lengths or wall-thickness options.

Item Name	UPVC Pipe 4" X 1.5MM X 5.8MTR
Material	UPVC
Type	Pipe
Colour	Grey
Wall Thickness	1.5MM
Length	5.8MTR
Unit	1 Pcs

أنابيب البلاستيك (UPVC) قياس (4") طول (5.8M) سماكة (1.5mm)

Features & Benefits

Specification

Attachments

Frequently Asked Questions