صبغة خشب فاخرة سريعة الجفاف من راست أوليوم فاراثان لون (Kona)

Interior wood surfaces such as furniture, cabinets, doors, trim, floors, and paneling. For best results, prep the surface with light sanding and clean it thoroughly before applying the stain.

No. Kona’s formula does not require a separate wood conditioner. However, for very soft or blotchy woods, test on a scrap piece first.

One half-pint can cover up to 70 square feet, depending on wood porosity and application. It is designed for a one-coat application, though some projects may benefit from additional coats for deeper color.

Kona dries to the touch in about 1 hour. You can apply a polyurethane topcoat within 1 hour of applying the stain to streamline finishing.

This is an oil-based stain. It penetrates wood pores to highlight the grain. Cleanup is best done with mineral spirits, and ensure good ventilation during use.

Work in a well-ventilated area, wear gloves, and keep away from heat or sparks since it is flammable. Store the can sealed and out of reach of children. Follow all label instructions and consult the Safety Data Sheet for details.

Kona is a rich dark brown with subtle red undertones that bring out the grain. The final shade may vary depending on wood species and porosity, so testing on a scrap piece before starting is recommended.

Kona is darker with red undertones. For broader options, you can consider Dark Walnut (deeper shade), Chestnut (lighter brown with golden hues), Ebony (near-black depth), or Espresso (deep brown).

Kona is ideal for interior projects such as furniture, cabinets, doors, trim, and paneling. It delivers a deep color that enhances the wood grain and looks great on items like tables, dressers, and updated cabinetry.

Stir the can thoroughly, apply with a natural bristle brush or clean cloth along the wood grain, and wipe off any excess to control depth. Maintain a wet edge and allow the stain to dry before applying a topcoat if desired.

If you’re not satisfied with the result, you can sand the surface and reapply after proper prep. For color adjustments, a test piece on scrap wood is recommended before tackling the main project.