حبل الحماية من السقوط القابل للسحب من فولتكس (KBU) طول (12Mtr)

Key specs: 12 m maximum working length, 4 mm stainless steel rope, polyamide casing, 25 kN strength rating, and CE EN 360:2002 safety standard coverage. It comes with steel karabiner, swivel alloy, steel snap hook, and conduit rope to ensure secure attachment to your harness and anchor point.

The device is CE certified and complies with EN 360:2002 for fall arrest devices, providing assurance of its performance in compatible protective environments.

Install by attaching the steel karabiner to a compatible harness and secure the other end to a rated anchor point. Ensure the anchor point can withstand the forces involved. Check the rope and housing for damage, avoid twists, and allow the device to extend and retract smoothly as you move. Always pre-inspect before use and operate within the device’s 12 m working length.

It's designed for professional and safety-critical work where you need reliable fall protection, such as construction, maintenance, roof work, tower/climbing tasks, and industrial access where a secure anchor point is available within a 12 m reach.

Regularly inspect the rope for fraying or corrosion, check the polyamide casing for cracks, ensure the steel components (karabiner, snap hook, swivel) are undamaged and moving freely, and clean the unit with a damp cloth. Store in a dry, clean place away from chemicals that could degrade the materials.

Choose based on your workspace: shorter lengths are lighter and easier to maneuver in tight spaces, while longer lengths reduce the need to re-anchor frequently in larger areas. Since this model is 12 m, match it to typical overhead reach and anchor spacing for your site, and consider alternative lengths if your work area requires more or less rope length.

Other Vaultex variants commonly differ by rope length (e.g., 8 m, 10 m, 15 m, 20 m) and sometimes by rope diameter or housing design. Longer models increase reach but add weight, while shorter models are lighter and more compact. Compare the 12 m option with neighboring lengths to balance reach, weight, and cost for your application. Alternatives: Vaultex KBU 15m (https://fepy.com/product/vaultex-kbu-15m-wire-rope-retractable-fall-arrester), Vaultex KBU 10m (https://fepy.com/product/vaultex-kbu-10m-wire-rope-retractable-fall-arrester), Vaultex KBU 8m (https://fepy.com/product/vaultex-kbu-8m-wire-rope-retractable-fall-arrester), Vaultex KBU 20m (https://fepy.com/product/vaultex-kbu-20m-wire-rope-retractable-fall-arrester).

If you’re unsure about fit or suitability, you can evaluate value against alternatives by considering the material quality (4 mm stainless steel rope, polyamide housing), construction strength (25 kN), and the included hardware (karabiner, swivel, snap hook). If the product isn’t right for you, check Fepy’s standard return policies for applicable conditions and timeframes after receipt.

Its combination of a robust 4 mm stainless steel rope, a durable polyamide housing, and solid hardware (steel karabiner, swivel alloy, steel snap hook) provides reliable protection with a 12 m working length. The 25 kN strength rating and EN 360:2002 compliance add confidence for use in appropriate safety environments, making it a solid option for professional fall protection.

Do not use if the rope shows signs of wear, the housing is cracked, or any hardware is damaged. Do not exceed the rated working length or use in environments where the anchor point cannot reliably withstand fall forces. Always use with a compatible harness and ensure the entire system is inspected before each use.