حبل الحماية من السقوط القابل للسحب من فولتكس (LHD) طول (6Mtr)

Key specs: 6 m maximum working length, 4.8 mm stainless steel rope, polyamide housing, 100 kg weight capacity, 25 kN strength capacity, includes steel karabiner, swivel alloy, steel snap hook, and conduit rope, black color, EN 360:2002 compliant.

Yes. EN 360:2002 is a European standard for fall arresters with hand-operated rope grabs, defining performance requirements and testing for safe use. Compliance means the device has been evaluated for reliable fall arrest performance, energy absorption, and safe operation within the specified limits when used with compatible harnesses and anchor points.

Basic setup: (1) Inspect the unit for damage and ensure all components are present. (2) Attach the steel karabiner to the worker’s harness dorsal D-ring and the snap hook to the anchor point. (3) Ensure the anchor point is rated for fall arrest loads and that edge protection is used if there are sharp surfaces. (4) Extend the rope to its working length during the initial test and confirm smooth retraction. (5) Avoid twisting the rope and do not attach the device to lanyards or other non-compatible anchors. (6) After work, retract the rope and store in a dry, clean area.

Ideal for work at height in construction, maintenance, roofing, electrical, and industrial environments where workers need reliable fall protection over a 6 m working length, such as on scaffolds, rooftops, or elevated platforms.

Follow these precautions: (a) Use a harness with a proper dorsal D-ring and a compatible anchor point. (b) Ensure the anchor point and connecting hardware are rated for fall arrest loads. (c) Use edge protectors to prevent rope fraying on sharp edges. (d) Do not use the device for lifting or as a substitute for guardrails. (e) Regularly inspect for wear, corrosion, or rope damage and retire if any damage is found. (f) Use appropriate gloves and avoid snag hazards.

Compared to the 4 m and 8 m variants within the Vaultex LHD range on Fepy, this 6 m version provides a mid-range working length with the same 100 kg load capacity and 25 kN strength. For different job requirements, you can review alternatives: Vaultex LHD 4m Wire Rope Retractable Fall Arrester (https://fepy.com/product/vaultex-lhd-4m-wire-rope-retractable-fall-arrester) and Vaultex LHD 8m Wire Rope Retractable Fall Arrester (https://fepy.com/product/vaultex-lhd-8m-wire-rope-retractable-fall-arrester). These options share the same build quality and EN 360:2002 compliance but differ in maximum working length to suit various tasks.

If the rope jams or you observe fraying, kinks, cuts, corrosion, or any abnormal wear, stop using the device immediately and retire it from service. Do not attempt to repair the rope yourself. Contact the supplier or manufacturer for inspection, replacement parts, or a replacement unit to maintain safety.

Included components are: a durable polyamide casing, 4.8 mm stainless steel rope, steel karabiner, swivel alloy, steel snap hook, and conduit rope, all designed to work together for a safe 6 m working length.

Store in a dry, clean area away from direct sunlight and chemicals. After use, wipe off dirt or moisture, visually inspect for signs of wear, and avoid contact with sharp edges. Regular maintenance checks should be conducted according to your workplace safety policy or manufacturer guidelines to ensure ongoing reliability.

Yes, given the 6 m working length, 100 kg load capacity, 25 kN strength, EN 360:2002 compliance, and the included mounting hardware (karabiner, swivel alloy, snap hook), it provides a balanced combination of performance, durability, and safety at a competitive price point for typical height-safety applications.