حبل فولتكس (MES) من النايلون و البولي أميد قطر (14mm) طول (150Mtr)

Diameter: 14mm. Length: 150m. Material: Nylon/Polyamide. Breaking strength: 38 kN. Color: White. Included hardware: snap carabiner and end stop knot. Standards: EN 354:2010 and EN 355:2002. Built with high‑tenacity stitching to resist wear in tough conditions.

The package includes the 14mm nylon/polyamide rope itself, a snap carabiner, and an end stop knot. The hardware is designed for reliability and is zinc‑plated alloy steel, with an edge‑free design for safe handling.

Before use, inspect the rope and hardware for wear or damage. Use the included snap carabiner or a compatible carabiner, attach to a secure anchor, and ensure the knot and stopper are properly tied. Avoid sharp edges, kinks, and exposure to chemicals or extreme heat. Do not exceed the maximum working length and follow proper rigging practices for your activity.

This rope is well suited for climbing assistance, industrial rigging, rescue scenarios, outdoor expeditions, and any situation requiring a durable, high‑strength anchorage line with reliable hardware.

Vaultex MES 14mm offers a thicker diameter (14mm) and longer length (150m) with a 38 kN strength, plus included snap carabiner and end stop knot. For reference, these alternative Vaultex options are also listed on Fepy:

Store the rope in a cool, dry place away from direct sunlight and chemicals. Avoid prolonged exposure to heat. Coil or hang the rope neatly, and keep the end stops and carabiners clean and free from dirt to maintain performance.

Yes. The included end stop knot provides a secure termination for anchoring. When attaching to anchors or hardware, use appropriate knots suited to your activity (for example, stopper knots or figure‑eight variations) and ensure the knots are tight and dressed properly. Always pair with compatible carabiners and inspect hardware before use.

Yes. Built from Nylon/Polyamide, it is designed to withstand outdoor conditions and demanding industrial use while maintaining strength and reliability. The EN certifications indicate suitability for professional applications when used with proper technique and equipment.

Consider required diameter (14mm for higher strength), total length (150m in this case), working load (approx. 38 kN), the included hardware (snap carabiner and end stop knot), and EN compliance. If your task demands a shorter length or different diameter, compare with other Vaultex options on Fepy to find the best match.

Yes, you can utilize Fepy’s standard return policy for this rope as long as it is in compliant condition per the policy terms. If you have concerns about fit or performance, you can initiate a return within the applicable period and follow the provided return process.

These EN standards indicate the rope meets recognized requirements for rope–connector systems and energy absorption components used in safety and rescue applications. They help ensure compatibility with compatible anchors, connectors, and protective equipment, reinforcing safe operation when used as part of a proper rigging setup.