حبل سلكي مانع للسقوط قابل للسحب من فولتكس (OVU) بطول (12Mtr) مزود بمقبض

Key specs include: maximum working length of 12 meters, weight capacity of 100 kg, strength capacity of 25 kN, a 4.8 mm stainless steel rope, polyamide housing, and included components such as a conduit rope, steel karabiner, and swivel alloy steel snap hook. It is CE 0082 and EN 360:2002 certified.

It complies with CE 0082 and EN 360:2002 safety standards.

This fall arrester is suitable for high-height work in construction, roofing, maintenance, wind turbine installation, telecoms, and other risky environments where extended reach and reliable fall protection are needed for a single worker.

Steps: (1) Inspect the unit for damage before use. (2) Attach the steel karabiner to your harness D-ring. (3) Route the rope through your work area using the conduit rope to minimize snagging. (4) Extend the rope to your required length, keeping it taut and free of kinks. (5) Avoid sharp edges and ensure secure anchor points. (6) After use, retract the rope and store in a dry, protected place.

This model offers a longer reach with 12 meters of rope, a higher weight capacity of 100 kg, and a strength rating of 25 kN, along with a durable polyamide housing and high-quality stainless steel rope. These features provide extended range and robust protection compared with shorter or lower-rated alternatives.

Included components are the polyamide housing, 4.8 mm stainless steel rope, swivel alloy steel snap hook, steel karabiner, and a conduit rope to help guide the rope along the work path.

Regularly inspect for rope fraying or corrosion, cracks in the polyamide housing, and any deformation of hooks or carabiners. Clean with mild soap and water if needed, dry thoroughly, and store away from chemicals and direct sunlight. Replace any damaged parts immediately.

Yes, it is designed for high-risk professions and environments where extended reach is beneficial. Ensure your harness is compatible, use secure anchors, and avoid damaged rope or compromised anchor points. It is built to withstand tough working conditions while providing reliable protection.

If you need shorter reach, you might consider Vaultex OVU 8m and Vaultex OVU 6m models. Available on Fepy.com at: Vaultex OVU 8m: https://fepy.com/product/vaultex-ovu-8m-wire-rope-retractable-fall-arrester and Vaultex OVU 6m: https://fepy.com/product/vaultex-ovu-6m-wire-rope-retractable-fall-arrester. These offer similar safety features with shorter rope lengths for different work scenarios.

Value is influenced by the rope length (12 m here), material quality (stainless steel rope, polyamide housing), overall durability, maximum load and force ratings (100 kg, 25 kN), and compliance with CE 0082 and EN 360:2002. Additional components and reliability of the anchors and hooks also affect long-term performance and cost efficiency.

First, stop using it and inspect the rope path for twists, kinks, or obstructions. Gently free any blockages, ensure the conduit rope is guiding the rope correctly, and check that connectors and hooks are not damaged. If the issue persists, contact support for inspection or replacement guidance.