Question 1

What is the Vaultex WL30 Shock Absorbing Twin Webbing Lanyard and what is it used for?

Accepted Answer

The Vaultex WL30 is a fall-arrest lanyard designed for work at height. It uses a shock-absorbing twin webbing design and a stainless steel rope to connect you to a safe anchor point or harness, helping prevent falls during height-related tasks.

Question 2

What are the key specifications of the WL30 (weight capacity, breaking strength, length, materials, certification)?

Accepted Answer

Specifications include a weight capacity of 100 kg, a maximum working strength of 25 kN, and a maximum working length of 10 meters. It features a 4.8 mm stainless steel rope and a polyamide casing. It is certified CE 0082 and EN 360:2002.

Question 3

What components are included with the WL30?

Accepted Answer

The WL30 includes the fall arrester body along with a steel karabiner, swivel alloy, steel snap hook, and conduit rope to ensure secure connections to your safety harness and anchor points.

Question 4

Is the WL30 CE 0082 and EN 360:2002 certified?

Accepted Answer

Yes. The WL30 is certified CE 0082 and EN 360:2002, indicating compliance with European safety standards for fall arrest devices.

Question 5

How do I properly wear and connect the WL30 to my safety harness?

Accepted Answer

Before use, inspect the unit and then connect the steel karabiner to a compatible anchor point or the harness D-ring. Attach the other end to the anchor with the snap hook as directed by your harness and anchor configuration, ensuring the conduit rope runs freely and the device sits logistically for comfortable movement.

Question 6

What is the maximum working length of the WL30 and can it be extended beyond 10 meters?

Accepted Answer

The WL30 has a maximum working length of 10 meters. It should not be extended beyond this length, as doing so could compromise performance and safety.

Question 7

What are common use cases for the WL30?

Accepted Answer

The WL30 is suited for general height work across construction, maintenance, industrial sites, and warehouse tasks where fall protection is required during movement, positioning, and work at height.

Question 8

How should I inspect, maintain, and store the WL30 to ensure safety?

Accepted Answer

Regularly inspect before each use: check the polyamide casing for cracks, inspect the 4.8 mm rope for fraying or cuts, verify the steel hardware (karabiner, snap hook, and swivel) for corrosion or deformation, and ensure the conduit rope moves freely. Clean with mild soap and water if needed, dry completely, and store in a cool, dry place away from direct sunlight and chemicals.

Question 9

How does the WL30 compare to other similar products on Fepy (and where can I find them)?

Accepted Answer

If you’re considering alternatives on Fepy, you can compare with the Vaultex WL40 and Vaultex Fall Arrester. These options offer different lengths or configurations while maintaining safety standards. Compare here: Vaultex WL40: https://fepy.com/product/vaultex-wl40-shock-absorbing-twin-webbing-lanyard; Vaultex Fall Arrester: https://fepy.com/product/vaultex-fall-arrester

Question 10

What is the value or advantage of choosing the WL30 over alternatives?

Accepted Answer

The WL30 offers a balanced combination of compact design, durable polyamide housing, 4.8 mm stainless rope, and a 10 m working reach with solid safety certifications. Its compact form factor and robust components can result in easier movement and potentially lower replacement costs compared to more complex systems.

Question 11

What safety and best practices should I follow when using the WL30 on a job site?

Accepted Answer

Always use the WL30 with a compatible harness and anchor point, ensure all connections are secure, avoid sharp edges and sharp loads on the rope, perform pre-use inspections, and avoid exposing the equipment to heat, direct sunlight for prolonged periods, or corrosive environments. Follow your site’s fall protection plan and manufacturer guidelines.

Question 12

Are there any warnings or specific considerations for the WL30 (e.g., weight limits, rope care, exposure)?

Accepted Answer

Key considerations include adhering to the 100 kg load limit and 25 kN strength rating, not extending beyond 10 meters, handling and inspecting the 4.8 mm stainless rope for wear, and avoiding exposure to extreme heat or harsh chemicals that could degrade the polyamide casing or rope.

Question 13

Can I use the WL30 with any harness, and what compatibility should I check?

Accepted Answer

The WL30 is designed to work with standard safety harnesses that include a compliant D-ring and anchor points. Ensure the harness and anchor configuration are rated for fall protection devices and that the connection hardware (karabiner and snap hook) is compatible with your equipment.

حبل أمان مزدوج ممتص للصدمات من فولتكس (WL30)

Features & Benefits

Specification

Attachments

Frequently Asked Questions