Question 1

What is the WC Screw and what is it used for?

Accepted Answer

The WC Screw on Fepy is a high-quality stainless steel hex socket cap screw (DIN 912 A2-70). It’s designed for outdoor or exposed environments and is available in sizes from M4x25 mm up to M8x50 mm for secure, vibration-resistant connections.

Question 2

What does DIN 912 A2-70 mean in plain terms?

Accepted Answer

DIN 912 is the standard for hex socket cap screws with a hex socket head. A2-70 indicates stainless steel of grade A2 with a minimum tensile strength of about 70 ksi, offering good corrosion resistance suitable for outdoor use.

Question 3

What sizes are available for this screw?

Accepted Answer

The WC Screw is offered in sizes ranging from M4x25 mm to M8x50 mm, covering small to medium fastener needs with hex socket heads.

Question 4

What are the main specs (material, head type, standard) of the WC Screw?

Accepted Answer

Material: A2-70 stainless steel; Head type: hex socket cap; Standard: DIN 912; Finish: corrosion-resistant stainless steel; Lengths: 25–50 mm; Diameters: M4–M8.

Question 5

How do I install a hex socket cap screw like this?

Accepted Answer

Insert the screw and turn it with an appropriately sized hex key (Allen wrench) that fits the hex socket head. Start by hand, clean the threads if needed, then tighten until the connection is snug. Avoid overtightening to prevent thread damage.

Question 6

What safety or compatibility considerations should I keep in mind?

Accepted Answer

Use the correct hex key size to avoid rounding the head. Ensure the screw material is compatible with nearby metals to prevent galvanic corrosion (e.g., avoid mixing stainless with dissimilar metals in harsh environments).

Question 7

How does this screw compare to alternatives like M6x30mm or M8x50mm DIN 912 A2-70 screws?

Accepted Answer

Compared to M6x30mm (https://fepy.com/product/m6x30mm-din912-a2-70-hex-socket-cap-screw), the M6 version has a larger diameter and longer reach, offering higher load capacity. Compared to M8x50mm (https://fepy.com/product/m8x50mm-din912-a2-70-hex-socket-cap-screw), the M8 is larger still for even stronger assemblies. Both are DIN 912 A2-70 stainless steel and share the same head type and corrosion resistance.

Question 8

When would I choose this screw over its alternatives?

Accepted Answer

Choose the WC Screw when you need a corrosion-resistant, outdoor-rated hex socket cap screw in the M4–M8 range with lengths from 25–50 mm. If your load, diameter, or length requirements differ (e.g., heavier loads or longer reach), consider the M6x30mm or M8x50mm variants.

Question 9

What are common outdoor use cases for this screw?

Accepted Answer

Ideal for outdoor furniture, garden equipment, metal framing, gate assemblies, and other exterior hardware where a secure, corrosion-resistant fastener is needed.

Question 10

Is thread locking or lubrication recommended when using this screw?

Accepted Answer

Thread locking can be used for vibration-prone assemblies, and a light lubricant can ease installation. Ensure compatibility with stainless steel and the mating materials to avoid corrosion or buildup.

Question 11

Does the WC Screw require special maintenance or care?

Accepted Answer

With A2-70 stainless steel, it’s designed for durability with minimal maintenance in typical outdoor environments. Periodically inspect for signs of corrosion and replace if patina or rust appears, especially in aggressive exposure zones.

براغي تثبيت المرحاض

وصف المنتج

وصف المنتج

Features & Benefits

Specification

Attachments

Frequently Asked Questions