Question 1

What is Weber Col Fix Tile Adhesive?

Accepted Answer

Weber Col Fix is a ready-mix, cement-based tile adhesive designed for internal use, polymer-modified, and water-resistant.

Question 2

What are the key characteristics of Weber Col Fix?

Accepted Answer

Available in grey or white, with a density of approximately 1.60 kg/litre, an open time of 15 minutes, and a pot life of 4 hours.

Question 3

What surfaces can Weber Col Fix be applied to?

Accepted Answer

Suitable for concrete, stone walls, and cementitious plaster. Not recommended for gypsum substrates, swimming pools, or facades.

Question 4

What is the recommended mixing ratio for Weber Col Fix?

Accepted Answer

Mix 4 to 4.8 litres of clean water per 20 kg bag.

Question 5

How long does it take for tiles to set after using Weber Col Fix?

Accepted Answer

Initial set time is approximately 570 minutes; final set time is around 750 minutes. Grouting should be done after at least 24 hours.

Question 6

What is the coverage area for Weber Col Fix?

Accepted Answer

Coverage varies between 3 to 7 kg per square meter.

Question 7

Are there any limitations to using Weber Col Fix?

Accepted Answer

Not suitable for gypsum substrates, swimming pools, or low-absorption tiles. Adjustments should be made within the open time.

Question 8

What safety precautions should be taken when using Weber Col Fix?

Accepted Answer

Ensure the substrate is clean, wear protective gear, and clean tools with water immediately after use.

Question 9

What is Webercol Fix Tile Adhesive used for?

Accepted Answer

Webercol Fix is a ready-mix cement-based tile adhesive designed for internal use. It is suitable for fixing various ceramic tiles on surfaces like concrete, stone walls, and cementitious plaster. It is not recommended for gypsum substrates or outdoor use.

Question 10

What are the key features of Webercol Fix?

Accepted Answer

Webercol Fix is water-resistant, has a strong bonding effect, and is easy to apply. It provides a non-slip surface and is suitable for use in wet and dry conditions, making it ideal for bathrooms and kitchens. It is available in white and grey colours.

Question 11

How do I prepare and apply Webercol Fix?

Accepted Answer

To prepare Webercol Fix, mix 4 to 4.8 litres of clean cool water with a 20 kg bag. Use an electric mixer at low speed (< 300 rpm) until a uniform paste is achieved. Let it rest for a few minutes before application. Apply evenly on the substrate using a notched trowel.

Question 12

What is the drying time for Webercol Fix?

Accepted Answer

The drying time for Webercol Fix is approximately 4 hours, but grouting should be done at least 24 hours after application.

Question 13

Can Webercol Fix be used on low-porosity tiles or outdoors?

Accepted Answer

No, Webercol Fix is not suitable for low-porosity tiles or outdoor use. It is designed specifically for internal applications and ceramic tiles with adequate porosity.

Question 14

How do I clean tools after using Webercol Fix?

Accepted Answer

Tools should be cleaned with water immediately after use. Once cured, any remaining material can only be removed mechanically.

Question 15

Can Webercol Fix be enhanced for exceptional performance?

Accepted Answer

Yes, you can mix Webercol Fix with a bonding agent like Weberad 225 MB for exceptional performance. For a 20 kg bag, use 1 litre of the bonding agent with 3 litres of clean water.

لاصق أسمنتي للبلاط (Weber) ذو اللون الأبيض من (Sodamco) بوزن (20Kg)

Features & Benefits

Specification

Attachments

Customer Reviews

Frequently Asked Questions