ملاط البلاط الأسمنتي من (weberjoint) المتين و المقاوم للتشقق وزن (5KG) باللون (122 Clay)

This grout is specifically formulated for tile joints ranging from 4 mm to 10 mm in width. It ensures a secure bond and effective filling for larger joints compared to its thinner counterpart.

The recommended mixing ratio for Weberjoint Thick is approximately 4.5 to 5 liters of water per 25 kg bag. For the 5 kg bag, about 1.3 litres of water should be used to achieve the desired consistency.

Weberjoint Thick Tile Grout exhibits high strength, crack resistance, and low shrinkage. It has a flexural strength of at least 3.5 N/mm² and a compressive strength of at least 15 N/mm², ensuring durability in various applications.

The pot life of Weberjoint Thick Tile Grout is approximately 2 hours at 20°C, allowing ample time for application. The shelf life ranges from 12 to 24 months depending on packaging and storage conditions.

After application, it is advised to avoid using excessive water during cleaning to prevent discolouration of the joints. A moist sponge should be used instead of high-pressure water sprays or chemical cleaners for at least three days post-application.

Weberjoint Thick Tile Grout is available in a wide range of colours—29 colours in the Near East and 23 colours in the Gulf and KSA regions—allowing for aesthetic flexibility in various tile designs.

Before grouting, ensure that all surfaces are clean and free from oil or grease. The substrate must be fully cured and dry, and it is recommended to allow a minimum curing time after tiling before applying the grout.

Weberjoint Thick Tile Grout 5Kg is a professional-grade grout designed to fill the joints between tiles. It provides high adhesion and a durable finish, suitable for tiles of all sizes on walls and floors. The product is formulated to be quick-drying and easy to work with, helping to speed up tile installations.

Weberjoint Thick Tile Grout 5Kg is designed for use with a wide range of tile types and sizes. For best results, ensure the substrate is clean, sound, and fully cured before grouting, and follow the manufacturer's guidelines for surface preparation and compatibility with specific tile types.

Key properties include high adhesion, low shrinkage, and a durable, crack- and break-resistant finish. It dries quickly to minimize downtime, provides good stain resistance, and is designed to produce a smooth, professional-looking grout line with less dust during application and cleanup.

Follow the product packaging instructions for mixing. Typically, you would add the specified amount of clean water to the grout powder to achieve a workable paste with a consistent, lump-free texture. Apply the grout into the joints using a rubber float, press it in firmly, remove excess grout, and clean the tile surface with a damp sponge before the grout fully hardens. Allow adequate cure time as recommended on the bag.

Weberjoint Thick Tile Grout 5Kg dries quickly and reaches handling readiness sooner than some traditional grouts. Full curing time depends on temperature, humidity, and airflow. Always refer to the product label for the recommended cure times and avoid heavy use or immersion until fully cured.

Compared with standard grouts, Weberjoint Thick Tile Grout 5Kg emphasizes a higher strength-to-weight ratio and lower dust during handling and cleanup. It is designed to deliver strong adhesion with a durable finish and easier workability, which can translate to faster installations and fewer repairs.

After grouting, use a damp sponge to remove any residue from tile surfaces while the grout is still working. Allow the grout to cure fully, then clean with a non-abrasive cleaner if needed. Avoid harsh acids or aggressive cleaners that could damage the grout surface, and maintain good ventilation during curing.