ملاط البلاط الأسمنتي من (weberjoint) المتين و المقاوم للتشقق وزن (5KG) باللون (173 Charcoal)

This grout is designed for joint widths between 4 mm and 8 mm. It provides optimal performance within this range, ensuring a strong and aesthetic finish.

The pot life of Weberjoint Thick Tile Grout is approximately 2 hours at a temperature of 20°C. This means it should be applied within this timeframe after mixing to achieve the best results.

Final drying time is about 24 hours at 20°C and 50% humidity. For optimal performance, it is also recommended to dampen the joints a few hours after application in hot or windy conditions.

Yes, it is water-resistant, making it suitable for both wet and dry areas. This feature enhances its versatility in various applications, including bathrooms and kitchens.

It is recommended to use a moist sponge for cleaning rather than excessive water to prevent discoloration. Avoid using high-pressure water sprays or chemical cleaning agents for at least three days post-application.

The shelf life of this product ranges from 12 to 24 months, depending on packaging and storage conditions. Proper storage in a cool, dry place can help maintain its effectiveness over time.

Weberjoint Thick Tile Grout 5Kg is a professional-grade grout designed to fill the joints between tiles. It provides high adhesion and a durable finish, suitable for tiles of all sizes on walls and floors. The product is formulated to be quick-drying and easy to work with, helping to speed up tile installations.

Weberjoint Thick Tile Grout 5Kg is designed for use with a wide range of tile types and sizes. For best results, ensure the substrate is clean, sound, and fully cured before grouting, and follow the manufacturer's guidelines for surface preparation and compatibility with specific tile types.

Key properties include high adhesion, low shrinkage, and a durable, crack- and break-resistant finish. It dries quickly to minimize downtime, provides good stain resistance, and is designed to produce a smooth, professional-looking grout line with less dust during application and cleanup.

Follow the product packaging instructions for mixing. Typically, you would add the specified amount of clean water to the grout powder to achieve a workable paste with a consistent, lump-free texture. Apply the grout into the joints using a rubber float, press it in firmly, remove excess grout, and clean the tile surface with a damp sponge before the grout fully hardens. Allow adequate cure time as recommended on the bag.

Weberjoint Thick Tile Grout 5Kg dries quickly and reaches handling readiness sooner than some traditional grouts. Full curing time depends on temperature, humidity, and airflow. Always refer to the product label for the recommended cure times and avoid heavy use or immersion until fully cured.

Compared with standard grouts, Weberjoint Thick Tile Grout 5Kg emphasizes a higher strength-to-weight ratio and lower dust during handling and cleanup. It is designed to deliver strong adhesion with a durable finish and easier workability, which can translate to faster installations and fewer repairs.

After grouting, use a damp sponge to remove any residue from tile surfaces while the grout is still working. Allow the grout to cure fully, then clean with a non-abrasive cleaner if needed. Avoid harsh acids or aggressive cleaners that could damage the grout surface, and maintain good ventilation during curing.

Yes. Wear appropriate PPE such as gloves and eye protection during mixing and grouting, work in a well-ventilated area, and follow the Safety Data Sheet and local regulations. Store the product in a cool, dry place away from moisture and out of reach of children.