ملاط البلاط الأسمنتي من (weberjoint) المتين و المقاوم للتشقق وزن (5KG) باللون (112 Bone White)

The grout has a density of 1.4 g/cm³, with a pot life of approximately 90 minutes and a final drying time of 24 hours at 20°C and 50% humidity. It can accommodate joint widths ranging from 2 to 8 mm and is classified as CG1 according to BS EN 13888 standards.

Yes, this grout is water-resistant, making it suitable for use in areas exposed to moisture, such as bathrooms and kitchens. It also provides a mold-resistant finish, enhancing its durability in humid environments.

To apply the grout, ensure that the adhesive has cured for at least 24 hours. Use a suitable tool to fill the joints evenly, and clean any excess grout from the tile surfaces before it sets. The minimum joint width for application is 2 mm for walls and 3 mm for floors.

Weberjoint Thick Tile Grout should be stored in a dry, ventilated place. It has a shelf life of one year when kept unopened. Once opened, it should be stored airtight to maintain its quality.

Yes, Weberjoint Thick Tile Grout is suitable for both indoor and outdoor applications. Its water-resistant properties make it ideal for exterior surfaces that might be exposed to varying weather conditions.

The primary colour available for Weberjoint Thick Tile Grout is Bone White. This neutral shade can complement various tile designs and aesthetics in both residential and commercial settings.

Avoid applying the grout in temperatures below 5°C or above 30°C to ensure optimal curing conditions. Additionally, do not use high-pressure water sprays or chemical cleaning agents on the grout until at least three days after application to prevent discolouration or damage.

Weberjoint Thick Tile Grout 5Kg is a professional-grade grout designed to fill the joints between tiles. It provides high adhesion and a durable finish, suitable for tiles of all sizes on walls and floors. The product is formulated to be quick-drying and easy to work with, helping to speed up tile installations.

Weberjoint Thick Tile Grout 5Kg is designed for use with a wide range of tile types and sizes. For best results, ensure the substrate is clean, sound, and fully cured before grouting, and follow the manufacturer's guidelines for surface preparation and compatibility with specific tile types.

Key properties include high adhesion, low shrinkage, and a durable, crack- and break-resistant finish. It dries quickly to minimize downtime, provides good stain resistance, and is designed to produce a smooth, professional-looking grout line with less dust during application and cleanup.

Follow the product packaging instructions for mixing. Typically, you would add the specified amount of clean water to the grout powder to achieve a workable paste with a consistent, lump-free texture. Apply the grout into the joints using a rubber float, press it in firmly, remove excess grout, and clean the tile surface with a damp sponge before the grout fully hardens. Allow adequate cure time as recommended on the bag.

Weberjoint Thick Tile Grout 5Kg dries quickly and reaches handling readiness sooner than some traditional grouts. Full curing time depends on temperature, humidity, and airflow. Always refer to the product label for the recommended cure times and avoid heavy use or immersion until fully cured.

Compared with standard grouts, Weberjoint Thick Tile Grout 5Kg emphasizes a higher strength-to-weight ratio and lower dust during handling and cleanup. It is designed to deliver strong adhesion with a durable finish and easier workability, which can translate to faster installations and fewer repairs.

After grouting, use a damp sponge to remove any residue from tile surfaces while the grout is still working. Allow the grout to cure fully, then clean with a non-abrasive cleaner if needed. Avoid harsh acids or aggressive cleaners that could damage the grout surface, and maintain good ventilation during curing.