كوع بلاستيك بولي بروبيلين (Wefatherm) قياس (63MM) بزاوية (45Deg)

It's a 63 mm diameter PPR elbow that connects two pipes at a 45-degree angle to create a smooth, continuous piping run in plumbing installations.

Diameter: 63 mm; Angle: 45 degrees; Material: polypropylene-random copolymer (PPR); Design: weather-resistant and durable for long-term use in plumbing applications.

PPR elbows offer reliable, durable connections with smooth flow, reduced turbulence at bends, and good resistance to corrosion and weathering in typical plumbing environments.

Use it to connect two 63 mm PPR pipes at a right-of-bend junction where a gradual change in direction is needed, helping to maintain steady water flow and reduce pressure changes.

Prepare the pipes (cut square and deburr), ensure clean mating surfaces, and join using your system’s standard PPR joining method (fusion welding or appropriate solvent cement/coupling method) following the chosen method’s guidelines. Allow proper curing or fusion time as specified by your joining system.

You’ll typically need a PPR pipe cutter, deburring tool, and the joining method recommended for your PPR system (fusion welding equipment or solvent cement/couplers if supported). Ensure you have clamps or supports to secure the elbow during installation if required.

Yes, it is designed for standard piping systems and is made from a common PPR material used in plumbing. Follow standard handling and installation best practices to ensure a leak-free connection.

The elbow is described as weather-resistant and durable, making it suitable for many outdoor or exposed installations, provided it’s used within its intended plumbing context and not subjected to extreme conditions beyond its design limits.

Match the elbow to your pipe diameter (63 mm in this case) and choose the angle (45°) to achieve the desired directional change while maintaining smooth flow. If you need a different angle or diameter, check for compatible WeFatherm PPR elbows in the same product family.

For alternatives, you can consider: WeFatherm 63mm x 90° PPR Elbow (URL: https://fepy.com/products/wefatherm-63mm-90deg-ppr-elbow) and WeFatherm 32mm x 45° PPR Elbow (URL: https://fepy.com/products/wefatherm-32mm-45deg-ppr-elbow). These options provide different angles or sizes to suit other sections of your piping layout while maintaining the same material and joining methods.

Ensure clean, square cuts on pipes, proper alignment, and correct joining technique for your chosen PPR system. Allow any required curing or fusion time, and avoid over-tightening mechanical fittings or applying excessive stress at the joint.

The 63 mm x 45° Wefatherm elbow provides a durable, weather-resistant solution for converting pipe direction with a predictable flow path. Compare price, compatibility with your PPR system, and availability of matching sizes/angles on Fepy to determine the best value for your project.