وصلة تحويل T مصنوعة من (PPR ) من (Wefatherm ) للتركيب مع الأنابيب

It’s manufactured from polypropylene random copolymer (PPR), chosen for durability and strength. The fitting is rated to withstand temperatures up to 95°C, and it offers chemical resistance and corrosion resistance typical of PPR fittings—suitable for hot and cold water piping systems.

The fitting features a dent-free profile and precise molding to minimize stress points and ensure a tight contact surface with the pipe. For a proper seal, use the recommended installation method for PPR systems (such as the appropriate fusion or joining technique) and ensure pipe ends are clean, square-cut, and deburred before joining.

Common sizes for PPR tees include 20 mm, 25 mm, and 32 mm. Choose the size that matches your pipe diameter. If you’re unsure, measure the outer diameter of your PPR pipe and match it to the fitting size. On Fepy, you can find size-specific pages for each option.

General steps: (1) cut the PPR pipe square and clean the ends, (2) deburr and dry-fit to ensure proper alignment, (3) join using the recommended PPR joining method (fusion/wusion as per manufacturer guidelines) until fully seated, (4) allow any fusion or glue process to cool/set as required by the method, and (5) perform a pressure test or leak check once cooled.

Ideal for hot or cold water distribution in both residential and commercial plumbing. Use it to branch a PPR piping run in kitchens, bathrooms, heating circuits, or any PPR-based water distribution system that requires a durable, leak-resistant tee connection.

Compared to other PPR tees available on Fepy, this Wefatherm tee shares the same high-temperature rating and leak-resistant design but comes in different sizes to fit various pipe diameters. For size-specific comparisons, you can review these related PPR tees on Fepy: - Wefatherm PPR Tee 20mm: https://fepy.com/product/wefatherm-ppr-tee-20mm - Wefatherm PPR Tee 25mm: https://fepy.com/product/wefatherm-ppr-tee-25mm - Wefatherm PPR Tee 32mm: https://fepy.com/product/wefatherm-ppr-tee-32mm Choose the size that matches your piping and flow requirements.

Yes. It’s designed to be compatible with standard PPR pipe systems and should be matched to the corresponding pipe size (e.g., 20 mm to 20 mm, 25 mm to 25 mm, etc.). Always confirm the pipe diameter and the connector type recommended by your PPR system’s guidelines.

Yes. Follow local plumbing codes and standards for PPR installations. Wear appropriate safety gear when cutting pipes, ensure proper ventilation if using any joining adhesives, and perform leak testing after installation to confirm system integrity.

Periodically inspect joints for any signs of leakage or stress, especially after pressure testing or system changes. Ensure fittings remain properly aligned and fully seated, and re-test the system if you notice any dampness or drops in pressure. Routine maintenance is typically limited for PPR tees beyond standard leak checks.

Return policies vary by seller, but most products on Fepy allow returns within a defined window if unused and in original packaging. Check the specific product page on Fepy for the exact return window, conditions, and proses. If you need help, contact Fepy support via the product page for guidance.

PPR tees like this Wefatherm option offer corrosion resistance, heat tolerance (up to 95°C), and compatibility with modern PPR piping systems. They’re lighter, easier to install with fusion methods, and less prone to corrosion than metal fittings, making them a practical choice for durable, leak-resistant water distribution in many environments.