صمام التعويم لضبط مستوى الماء وينتكس (5M)

Key specs include a 5-meter cable length, Wintex material for durability, corrosion resistance, waterproof construction, and suitability for both wet and dry environments. It is designed to withstand temperature extremes and is easy to install and maintain.

Install the float switch at the desired level inside the tank or pond, route the 5-meter cable to your controller or alarm, connect according to your device’s wiring diagram, ensure the float can move freely, and test the system by briefly filling or draining the liquid to verify triggering.

Ideal for monitoring water levels in tanks, ponds, rain barrels, irrigation systems, fountains, and other water-filled installations where automated level control or alarms are beneficial.

The core sensing technology is the same across Wintex float switches, but cable lengths vary. For shorter or longer reach, you can consider the Wintex 3M Float Switch (https://fepy.com/product/wintex-3m-float-switch) or the Wintex 10M Float Switch (https://fepy.com/product/wintex-10m-float-switch) to fit your installation distance.

Wipe the exterior with a damp cloth and check for any corrosion or debris that could impede the float’s movement. Ensure the float can rise and fall freely and re-secure wiring if needed after cleaning.

Always disconnect power before wiring or service. Use proper electrical enclosures and cable protection, follow local electrical codes, and avoid exposing the switch to explosive atmospheres or physical damage.

The unit is designed for wet and dry environments, with corrosion-resistant and waterproof construction suitable for tanks, ponds, irrigation lines, and other water-containing applications.

Check wiring continuity and ensure the cable is properly connected to the controller. Verify the water level actually reaches the switch and that the float can move without obstruction. Inspect for debris, and confirm the controller input is configured to read the switch signal.

Consider the distance from the tank or pond to the control panel. A 5-meter cable covers many standard installations, but if your controller is farther away or needs more slack, choose a longer variant (e.g., 3M or 10M) to ensure reliable wiring without strain.

The switch provides a signal when the water level reaches the set point, which you can connect to a dry-contact or compatible input on your controller or alarm. Follow your device’s wiring diagram for proper polarity and terminal connections.

You can explore related accessories and replacements in Fepy’s water level sensor category or the Wintex accessory listings, such as the Wintex 3M Float Switch and Wintex 10M Float Switch pages: https://fepy.com/product/wintex-3m-float-switch and https://fepy.com/product/wintex-10m-float-switch