Asian Paints Berger Select 16L All In One Enamel 630 - Top Orange

It’s versatile for both interior and exterior surfaces. You can use it on properly prepared wood, metal, and certain masonry surfaces. Always ensure the surface is clean, dry, and free of rust, dust, and loose coating before painting.

Because it’s an all-in-one enamel, you’ll typically apply 1–2 coats depending on the surface and the desired depth of color. The product is designed for quick drying, so you can recoat after a short wait as indicated on the can. Always follow the surface to air dry and recoat times listed on the label for best results.

630 Top Orange is a vibrant, warm orange shade that can brighten walls, doors, trim, or exterior features. It’s suitable for living spaces, accent walls, doors, garden furniture, or shutters—where you want a bold, modern pop of color.

All In One enamel fuses primer, undercoat, and topcoat in one, so you don’t need to apply separate layers for each stage. This streamlines the painting process, saves time, and still provides good coverage and durability with a smooth, glossy finish.

Preparation is key: clean the surface to remove dirt and grease, sand any rough areas to create a smooth base, and wipe away dust. If you’re painting over a chalky or glossy surface, lightly sand and wipe it down to improve adhesion. For bare wood or metal, remove loose paint and rust as needed.

You can use a brush, roller, or sprayer. For larger flat surfaces, a roller gives the fastest coverage; a brush is great for edges and finish work; a spray is excellent for an ultra-smooth coat. Tip: apply in even strokes, maintain a wet edge, avoid overworking the paint, and keep the surface slightly damp to reduce brush marks.

Coverage depends on surface porosity and texture. A general guideline for smooth surfaces is several hundred square feet per liter per coat, but with a 16L tub you’ll have enough to cover larger areas with at least 1–2 coats. If you’re covering rough or porous surfaces, plan for a bit more paint and possibly a third coat if color depth requires it.

Yes, it’s designed for indoor use with relatively low odor compared to some traditional enamels. Ensure good ventilation during and after application, wear protective clothing and a mask if you’re sensitive to fumes, and follow the label’s safety precautions. Store in a cool, dry place away from children and heat sources.

The product advertises a low-odor profile and is formulated to be more user-friendly. While it’s designed to be less harsh than some older enamel systems, check the product’s Safety Data Sheet (SDS) for exact VOC content and usage guidelines.

If you’re not happy with your purchase, you can review the store’s return policy for paints and coatings. Ensure the product is unopened or in the condition specified by the policy, and contact customer support within the stated timeframe to initiate a return or exchange.

If you’re exploring other all-in-one enamel options on Fepy, you can compare with similar all-in-one enamel products in the catalog. For a direct comparison, see: