Asian Paints Berger Floor Guard Epoxy Top Coat, 20L Base + 5L Hardener, Napoli Green, Heavy-Duty Epoxy Floor Finish

The product is available in 20L and 5L packs, designed to cover up to about 200 square feet on smooth, even surfaces per pack. It offers self-levelling performance, strong adhesion to various substrates, water and dirt resistance, and is non-yellowing with UV resistance. The Napoli Green color provides high hiding power and a vibrant finish.

Ensure the floor is clean, dry, and structurally sound. Remove grease, oil, and contaminants, repair cracks or defects, and lightly abrade the surface for better adhesion. If needed, perform any recommended priming steps and allow the surface to dry completely before applying the top coat.

Apply the epoxy top coat on a clean, dry surface using a roller or brush to achieve an even, self-levelling finish. After application, allow the coat to cure as per label directions; typically, you can walk on the surface after a short touch-dry period and achieve full cure over several days. Always follow the exact times and instructions printed on the product label for best results.

A 20L or 5L pack is designed to cover approximately up to 200 square feet on smooth, even surfaces, depending on surface texture and porosity. For best results, apply a uniform coat and avoid pooling.

Napoli Green provides a bold, vibrant look with strong hiding power for cracks and imperfections, while other colors like Concrete Grey or Charcoal Black offer different aesthetic effects and may show dirt or wear differently over time. All variants share the same epoxy performance characteristics such as UV resistance, abrasion resistance, and adhesion, with color choice primarily affecting appearance and maintenance perception.

It's ideal for interior concrete floors in residential spaces, commercial venues, and industrial settings with high foot or equipment traffic. The coating’s durability, abrasion resistance, and chemical resistance make it suitable for areas like showrooms, workshops, retail floors, and entryways.

Work in a well-ventilated area and use appropriate PPE such as gloves, eye protection, and a respirator if needed. Avoid skin and eye contact with the uncured product, keep away from heat or open flames, and store according to label guidelines. Follow all safety instructions provided on the product label.

The epoxy top coat is designed to bond to properly prepared interior concrete floors and compatible substrates. If recoating, ensure the previous layer is clean, dry, and lightly abraded for adhesion. Follow the label’s recoat timing and application guidelines to achieve a uniform finish.

Maintain the floor with regular cleaning using non-abrasive cleaners. Avoid harsh solvents that could affect the epoxy layer. Use mats or de-dusting routines in high-traffic areas to minimize wear, and address any spills promptly to prevent staining.

Yes, there is a return policy for eligible products. Please review the platform’s return terms and conditions for eligibility, timelines, and the process to initiate a return if the product doesn’t meet expectations.