Asian Paints Berger Floor Guard Epoxy Top Coat, 20L Base + 5L Hardener, Post Red, Heavy-Duty Epoxy Floor Finish

Suitable: concrete, cement, asbestos and other compatible substrates, including indoor and outdoor floors. Preparation and priming are important for best adhesion. If unsure about a specific surface, test a small area first and ensure the substrate is clean, dry and sound before coating.

High adhesion and long‑lasting protection; strong chemical, oil, grease and water resistance; dirt rejection and easier cleaning; dust suppression properties; designed for high‑traffic floors like garages, warehouses and manufacturing areas.

The product is available in 20L and 5L cans to suit different project sizes. Coverage depends on surface porosity and application method (brush or roller); follow surface preparation and priming recommendations to optimize yield.

Yes. For best results you should use a suitable primer for the chosen surface to promote adhesion and durability. Proper surface preparation (clean, dry and sound) is essential before priming and coating.

1) Prepare and clean the surface; 2) Apply a compatible primer; 3) Mix the two components as per label instructions and mix thoroughly; 4) Apply evenly with a brush or roller, avoiding puddles; 5) Allow proper drying between coats and final cure as conditions allow; always refer to label‑specific instructions for temperatures and recoat windows.

Expect a durable, glossy protective layer with good resistance to oil, grease, water and common chemicals. It’s designed for high‑traffic areas and is easy to clean, reducing surface dust pickup and maintenance needs over time.

Work in a well‑ventilated area and wear appropriate PPE (gloves, eye protection, and a respirator if fumes are a concern). Keep away from heat sources, store sealed and upright, and dispose of waste according to local regulations. Follow the product’s Safety Data Sheet (SDS) for complete safety guidance.

This Berger epoxy top coat offers strong chemical and wear resistance with a high‑gloss finish, similar to other epoxy floor coatings on Fepy. Other options available on the site (such as Nippon‑brand epoxy coatings or Jotun epoxy top coats) provide comparable performance with variations in color, gloss level and application nuances. Always choose based on substrate, traffic, exposure, and color preference.

Best suited for garages, warehouses, production or manufacturing floors, and indoor/outdoor areas that require durable chemical and abrasion resistance, easy cleaning, and a maintenance‑friendly finish.

Consider the long‑term protection it offers against wear, oil/chemical exposure and dust accumulation, which can reduce maintenance costs over time. Compare the total cost of ownership (coverage per liter, required coats, and expected lifespan) with alternative epoxy coatings to determine the best value for your space.

If you’re exploring alternatives, you can check these options on Fepy: Nippon Floor Epoxy Coating 5L at https://fepy.com/product/nippon-floor-epoxy-coating-5l, Jotun Epoxy Floor Top Coat 5L at https://fepy.com/product/jotun-epoxy-floor-top-coat-5l, and Berger Floor Guard Epoxy Top Coat 5L at https://fepy.com/product/berger-floor-guard-epoxy-top-coat-5l. Each offers different resin systems, finishes and color options, so choose based on your specific surface and environment.