APPLICATION DETAILS

• Make sure good ventilation is there during drying and application.
• Do not apply Joint compound powder when humidity increases 95% and condensation is probable.
• The surface temperature should be 3°C or above the moisture point.
• Mix the contents of the Gypsum Joint Compound entirely before and during usage with a broad flat stirrer, utilising an upward-lifting motion.
• Apply the Value Gypsum Joint Compound in a thin layer & allow drying. Apply a second coat if necessary to achieve complete levelling. Light sandpaper over the dry final surface before painting, preferably within 24hrs of application.

Solely dependent on the surface profile and the extent of filling required.

Practical Covering Capacity: For estimation of practical covering capacity, the following factors are to be taken into account: the surface profile, uneven application, losses in container and equipment, etc.

Drying Time: Substrate temp.

Touch dry Overcoating interval Minimum Maximum 150 C 6 hour 12 hours Indefinite 250 C 3 hour 18 hours Indefinite 350 C 1 hour 4 hours Indefinite